Welcome to Our Community

Some features disabled for guests. Register Today.

      1. Build Progress:
        • Build Complete!
      Rate This Build
      5/5,
      1 votes
      This is a design for my LR/BS CNC router.
      I wanted an easy to source/easy to build, yet quite robust CNC router.
      I must say I'm very satisfied with the result.

      Machine.png

      With a footprint of 750mmx750mm, the working area is of approximatively 480mmx600mm, with 80mm of Z travel. The machine can easily be scaled.

      The design uses linear actuator with two HGR-15 and one SFU1605 ballscrew for each axis (2 ballscrews for the Y-Axis). The ballscrews are fixed on both end using BK12/BF12 blocks. Each axis is driven by NEMA 23 motors.
      Plates are 3D printed (with reinforced side plates to avoid flex) but can also be cut from wood/aluminium if you have access to a CNC router.

      The frame is made of transverse 20x60 V-Slots in order to use vise clamps (OK-Vise or Mini Vise - CNC Low Profile Clamp by ptiwee). Wood planks slightly higher than the V-Slots (3mm) serve as martyr.

      Frame.png


      Motors are assembled using 3 9mm spacers, which should be rigid enough.

      Motor Coupling.png

      The Z-Axis uses two crossed linear rails. It is a heavy design that can be improved later, considering many existings Z-Axis design can be adapted.

      Z-Axis (Mounted).png

      Previous version using MGN-15 rails :

      LRBS.png Frame.png Motor Coupling.png Z-Axis.png Z-Axis (Back).png Z-Axis (Mounted).png

      18/11/2020 UPDATE:
      The build is finished. First cut are promising. BOM, DXF and STL are realease. The build cost me around 800€, + router.

      15/09/2020 UPDATE:
      I updated a bit the design for easier assembly and reinforced the side panel so that they can be 3D printed. I will publish the BOM and DXF as soon as I validate this new design.

      7/5/2020 UPDATE:
      I beefed up the machine. MGN-15 rails seemed to be quite weak for a heavy duty machine, and have been replaced with HGR-15. The linear actuator have been reinforced with corner angles. They are now made of 1 20x80 V-Slot and 2 20x40 V-Slots. Aluminium plates have been thicken to 15mm. FK12/FF12 blocks have been replaced for BK12/BF12 which allows for bigger work area.

      Attached Files:

      • LRBS.png
        LRBS.png
        File size:
        445.3 KB
        Views:
        2,932
  • Loading...
  • Build Details

    Build License:
    • CC - Attribution - CC BY

    Reason for this Build

    I wanted to upgrade from my OX CNC. Workbee CNC looks like an interesting upgrade, but V-Wheels are not rigid enough (the main issue with my OX CNC is the flexibility in the Z-Axis), so why not trying linear rails and big ballscrews ?
  • Attached Files:

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice