Separate names with a comma.
Some features disabled for guests. Register Today.
Ah! I never thought of using the screw itself for a tap. I may try that on a 6mm leadscrew and print the nut in Nylon. I'm using nylon nuts for...
In other words, you are getting 1mm height per revolution. I get that same with the 1.25 pitch using a 16 tooth on the motor and 20 tooth on the...
Right you are. Fixed the master BOM and TrueUp Glide Mount X Assembly BOM.
I love it when I get emails from you with "This one turned out amazing!" and "I love this thing!" and pics like this [IMG]
When you get pics and specs post it all right here on this forum so everybody can see it - and USE it. Looking forward to it!
I have not had time to change the assembly tutorial for these files, but here they are http://3dwrx.com/TrueUp/DIY/MK2/MK2-STLs.zip That zip...
Sound increase while printing is negligible because you're only moving a few steps per layer, and only on layer changes. But layer changes are...
I'm not familiar with Repetier firmware. In Marlin each motor has a number of "steps per mm". For example: #define DEFAULT_AXIS_STEPS_PER_UNIT...
Perfect bed springs USA shipping only 10pcs Spring for 3D Printer Extruder Heated Bed For Ultimaker Makerbot | eBay Same springs China (world...
The frame structure would be the same, so the difference would be the build plate, heat bed and mirror (2.5 lbs, not including object being...
By "conventional" design, I'm assuming you mean a Y axis moving forward and back, rather than the Y moving up and down. I don't even know how to...
Looks good. I suspect the formula for Pro (Plus) PLA is not a trade secret. And, eSun may be common manufacturers under different brand names....
eSun PLA Pro Amazon.com: eSUN 1.75mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Black: Industrial & Scientific The Pro is tough...
The BOM is at $306.
1.75mm = correct Unless you want to rest them on the table, the MKS-mount will be necessary, the PSU-hanger will be necessary. The MKS top, bottom...
Yes. You will need to use an extruder barrel with NO PTFE liner as PETG's print temp is higher that PTFE's. Probably the best PETG writeup I've...
Correct. The OpenBuilds Universal build plate will work, but the wheel holes and wire routing holes will still need to be drilled. I use a second...
The math for movement would not change. But you still need to recompile the firmware to set X_MAX_POS Y_MAX_POS Z_MAX_POS which define the size of...
I use 8"x8" because it's most common. AND, a 250mm bottom and top frame piece work at that width (no scrap to buy and toss). A 12" x 12" would...
Yes, the X & Y belts are not closed loop belts, so I did not list them. Figure a 1 meter should do it. Usually sold as more than just 1 meter....
