Separate names with a comma.
Some features disabled for guests. Register Today.
Actually, what I do is take two aluminum heat beds and use one for the build plate. That converted heat bed, and the OB universal build plate, do...
All the links are on the bottom of the build page OneZ i3
BTW, those 6mm washers don't have to be metal, or perfect. The washer is actually a spacer. It's ID has to be 6mm(1/4" will do) for the 6mm screw,...
I of course live in a country where proposing going metric would kill a politician's career and launch protest marches in the streets. BUT, in...
Fixed. Thanks Chris.
I neglected to respond to this part. Yes. If there are few, list them here and I'll check them. If there's quite a few, how about doing this in a...
Yes, everything is in millimeters. I don't even remember how to do inches.....
Yes. I print all TrueUp parts with 20% infill, 0.2 layers (0.4 first), and 4 perimeters with 4 solids top and bottom. No printed parts contribute...
I used to use green, but I changed to orange when I saw Prusa's MK2 in orange. It's not my favorite, but I figured Joe Prusa has better market...
That's a price delivered I probably can't beat. I'm reorganizing the SKP and STL files into 2 folders - Black and Color. You get to chose the...
Correct! I've fixed that, download again.
BTW, the under Y pieces for PSU and control box are black. The other pieces are orange. OK?
I'm starting a fresh set tomorrow for a TrueUp (want to verify that these new parts are 'good' before publishing them). That 93 pounds does seem...
Sorry for the delay Robert, We've had a snap blizzard here today and I've spent the better part of the day on a backhoe pulling people out of snow...
Hi Robert I've never shipped international except Canada and from that experience I'm guessing that shipping cost even for only printed parts...
Actually that's just what I did. Replaced the Y frame piece with one 100mm longer, longer belt and a 200x300 mirror, and adjust te firmware for...
The changes I plan for TrueUp are to split the 4 large pieces so they can be printed on an 8x8 bed. The Nylon bushings - well - uhhh - well --...
Resolution is just a matter of belts, pulleys and motors - if the framing and mounting is square, level and solid (which a OneZ is). X & Y...
If you are looking at building a laser cutter that is an OpenBuilds design, you might ask the designer of that build if they can supply the...
I built the XY carriage (no box & Z) to explore different ways to mount wheels. The design works with ordinary X & Y firmware settings, which...
