Separate names with a comma.
Some features disabled for guests. Register Today.
Photobucket Video worked and looks great! Like the drag chain placement :) Awesome seeing my plates :D Nice work :thumbsup: The last of my...
I use 16 awg as your not going to pull more then 10 amps. A 12 foot shielded power supply plug works well :)
It is 890kv as all my others, it's the sweet spot @12-14 vdc IMO RPM max no load will be around 10,000. This one is a little different as it's...
And here it is :) [ATTACH] Picking up the m4 screws tomorrow and then it's testing time ;)
Shop vac is a must and if milling MDF I would suggest a face mask
The diff is the way it locks and it's lighter. It comes with a special locking wrench :)
Parts are in so I gotta get this done lol [ATTACH] Went with a different type of collet, ER11M instead of the reg ER11A Now where's the coffee pot?
So this is what I have come up with so far. I have made a circuit that when the spindle on signal from the arduino nano goes high, the attiny 85...
You will see a big diff once the spoil board is in and mounted. Still waiting on my last driver to show up. The first 3 came fast but the forth I...
Most 1-2 watt 445nm diodes are salvaged from un-used M140 projectors. The ideal voltage is 7 vdc Current 1.25 I supply my LM317 with 12vdc adjust...
Didn't read your post correct, to tired. Thought you where saying you load the code and the z was working in the wrong direction
Hahaha What controller are you using? all that is needed is a 5 vdc signal for spindle on and off
First, how much? No need for an arduino Red laser diodes are weak Blue will get you close to 2watts "faster burn" 808 can't be seen " not my pref"...
I would also suggest if all software settings are correct you should check the motor phases are correct "simply reverse them" to change direction ;)
In that case then giver bud! I say better off using it rather then it sitting purty ;)
Just a stab but I would stay two times the amount of wear as it's twice the weight lol. I'm not sure of wear really just figure what one would...
I would have to say it would be un-needed weight added to the wheels causing faster wear. 1/4" is more then enough IMO.
I will be updating the file section of the build soon.
Sent :)
The set has small imperfections that are only cosmetic, bit chatter or a hickup in code. A fare discount is given on them :)
