Separate names with a comma.
Some features disabled for guests. Register Today.
I have a scratch and dig set if your in a rush, if not I would need about a week I have 1 person in line right now
@Glenn West No PM yet ?
What software do you use to generate the code for your PCBs as that is part of the puzzle I need to complete my Stinger PCB mill :) I know eagle...
This is my third RC spindle build and they say the third time is the charm :) Here are some short clips of my last spindle [media] [media]...
So after some testing I know the X axis has 360mm of travel from limit switch to limit switch Also the RC Motor I plan on using for the spindle...
I would say yes as Mark with the right bit was able to mill his own name plate that I designed in scetchup, note his Z also was not held in...
I hope that means your care package made it :)
I'm using a diffent mill to make them and still have yet to cut anything with my OX as the driver boards are taking for ever to arrive. I have 3,...
As of yet not really, I need to replace all the v wheels still and finalize the controls before I can really say anything. It is super solid...
It's 110mm by 50mm Sorry for the delay I'm swamped
I first started off by going through my sketch book and decided I wanted to incorporate an idea I call the Tension 20 into my design. [ATTACH] It...
I think you will find this link useful ;) http://www.openbuilds.com/builds/aluminum-ox.592/
Short answer yes You will need a different Z axis motor mount. The OX has a Nema 17 If I had the cash I would be using the same setup ;)
Here is the prototype :) Since the code I'm going to try and use is proven I went ahead and made it so if all works I don't need to build it again...
Consistent set points instead of guessing and having to turn the dial, With my last 555 timer you had to turn it slow till the three beep sounded...
For now I would like to make things work in the following manor, one of my relays will control power to the ESC "M8/M9" when enabled an attiny...
All that's left for the stinger is spindle control ;) [ATTACH] [ATTACH]
Sweet!
I had problems until I did a proper star ground including a ground lead from my BOB I myself am trying to get away from parallel ports also, I'm...
Just get yourself a $12 PCIexpress parallel port card and spend the extra on hardware ;)
