Separate names with a comma.
Some features disabled for guests. Register Today.
I have no idea about the quality of that spindle but the size is perfect for these machines IMO. Are you getting many hours out of your routers...
It will be $1000+ cheaper to get a printer like the XL cr-10 and put an enclosure over it. here is a list of large printers under $1000 Gary
Sorry about that, I updated the link its just the build video, yes the ones in Red, make sure that vertical C-beam is square first then adjust...
Hi Shotfun, can't you simply loosen your x gantry carriage plate at the black angle corner connectors and square as needed? [MEDIA] at about...
Hi Dax, Overkill for that machine probably, but if you got it already then go for it, wont hurt! Cheers Gary
Also setting your speeds or acceleration too high can cause this. Check all the wiring for sure, but also try lower speed and acceleration. Post...
"the router only stops when the dust collection hose is up against the router" Maybe have some power issue, how are you powering/controlling the...
Justin, go to the parts store support Cheers Gary
I hardly ever (almost never) home my machine.. Set the work zero and go, I only worry about it when doing larger projects with expensive material....
Hi Dax, Is there a reason you need 64x microstepping? typically 8x or 16x is plenty. Gary
Thanks Peter, I'll try that
[ATTACH] This build will evolve as I go.. Having a go at building a pull tester like the one on CNC Kitchen "OpenPull" project. Watch Stefan...
I'm having a heck of a time getting the openpull arduino project to compile and load.. any help would be great. I get a ton of errors which i...
Gary Caruso published a new build: This project is a Pull tester for material testing or structural testing with stress (force) data logging, I...
yes very common, surface your spoil board if you haven't already and surface the workpiece. Can surface the back to keep a smoother side if you...
Been using Nanocad (5 Free) for a while now, it's free and exactly like basic 2D Autocad. And it opens DWG just fine. nanoCAD Free is easy-to-use...
I agree with Rick, if you already have those drivers get an Arduino Uno and flash GRBL on to it, or Estlcam and learn to wire it up, getting a...
Looks like that motor bracket isn't stiff enough and there is a bit of offset to the motor shaft to screw. fix that and you wont break anymore....
I like my Ox HD no plans on changing it, dual belts was the key for me, much better than stretchy unsupported belts. The HD has 80x40 gantry and...
Really Nice! can't wait to see the rest! Gary
