Separate names with a comma.
Some features disabled for guests. Register Today.
This is awesome! I think I see an early Christmas present for me.. :)
Grbl preset would probably work just fine, but I just did mine over last weekend as I replaced my pc and xpro preset worked again perfectly....
it's a pain for sure, I use denatured alcohol and let it soak the paper for a minute and it will come off easier. I buy it by the gallon at...
From v10 you can update to latest version and your purchase code will still work. Cheers Gary
That looks like Baltic birch... the good stuff Like Giarc said, I put off trying a down-cut for ever, recently starting using them and I'm now...
I move my machine often without power on, slow is key. When something was working then it’s not, almost always wiring issue. Also I’m a big fan...
Hi Duncan, Yes you can keep the same workflow, only need to flash the firmware if you wish to use the Estlcam controller. (Which I have using the...
Most likely Monday you will get a response. Cheers Gary
Powge on Ebay has a good selection. Gary
You need to setup the z probe under controller settings first, then reprogram the mega, after that the tool height or probe will work in estlcam...
Last time I did it was with a 1" bottom clearing router bit, at 1500mm/min 0.5mm doc and I probably had the makita at 3 speed setting, I mostly...
Same..
Hi Poolrod, sounds like you need to calibrate your steps per mm. If using openbuilds standard screws and 1/8 micro stepping, then 200 steps per mm...
My belt driven machine will push clamps out of the way without loosing steps, Use strong motors and good quality drivers that can deliver the...
Thanks for the info, Yes you should always buy enough material for ~20 :) and you can never have enough bolts and slot nuts! Cheers
on and off? sure, using one of these is easiest.. IOT Switch Hookup instruction on the docs Cheers Gary
Your plates look fantastic great work! What is the gold? paint or anodize? Gary
I don't know why but made me think.. if it could cut 7 and a half slices is it really just 8 slices?
Have you trammed the z axis and the spindle? One example of many on how to do it. Cheers [MEDIA]
Enhance..... Enhance..... doesn't work like the movies :(
