Separate names with a comma.
Some features disabled for guests. Register Today.
$1=25 Step idle delay Change this to 255 so the drives never power off the holding current. The stuttering and vibrating thing is most...
Hi Josio, If it works with Estlcam then you must have flashed with the estlcam firmware, did you restore back to GRBL? Is this an arduino? Thanks...
Hi Josio, 1) Are you using a BlackBox? 2) post your GRBL settings here so we can see 3) what other software works? thanks Gary
No this uses GRBL (I use mine with Estlcam control flash) For Mach 4 you need a Mach 4 compatible controller. Gary
Hi Grif, Yes all the plugs on the BB have a matching connector. Watch the assembly video, one of the first things done is take all the included...
Hi Dani, If you really want higher speed have you thought about a belt drive system? Nema17 is tiny and you will run out of torque quickly, you...
YouTube is your friend, these are two video's i found quick, I'm sure there are better ones but this will get you started. Background apps to turn...
Looks like you have 5 passes to get to your final depth. Is this what you are talking about? Check your depth per pass and your total material...
Hi Xander, I moved this to the CAM area, I suspect the issue is a Fusion 360 settings or Post Processor issue. There are guys on here with more...
Hi Kasper, Is your flex coupler set-screw tight onto the flat of the motor shaft? Gary
Hi Dave get yourself some blue loctite. Any hardware or auto parts store will have it. Cheers Gary
I really like Greenshot, hit print screen and you get a snip tool and can copy for pasting or save to a file. Lets you select only what you want...
Sounds like you need to invert your home switch logic? $5 z home should be up. Do you have capacitors installed to suppress false limit...
Right, he was replying to my question if he had reverted back to grbl. I’ve done this successfully (just had to try the restore function in...
The 500mm and the speed for home seek is much too high 8000mm/min and your max speed is 500 so might be a bug? Set your, seek speed to 500 and...
Sounds very much like EMI noise from the router. Move your router power wires away from the USB cable and anything else connected to the arduino....
Ajkelsey, Not clear, so you did restore? If you can see your GRBL settings than it should be restored correctly. Post your GRBL settings here....
Not with OB control, Backlash comp is very tricky to implement and get reliable results. I would recommend determining the cause of your...
good find! What I do is place on hard flat work table, place small block of wood on top and press down with hands hard. cheers Gary
You should be able to tighten the bolts all the way, if you can not then the wheels are missing a washer in between the bearings, or the bearings...
