Separate names with a comma.
Some features disabled for guests. Register Today.
Well spotted, 13000rpm is correct
If you know the tools recommended chip load you can use the below calculation to find a ball park of where to start testing your feeds and speeds...
I would be aiming for a chipload of around 0.076-0.102mm for a 1/8th up cut single as a starting point. At 11k rpm I would also aim for around...
+1 for the 800w water cooled spindles as in my opinion I think that is the right balance of power, weight and performance when building with...
The Robot Oblivion is nigh
My import DRV88255 drives do overheat at the drop of a hat and this can look like the axis is shuddering as the axis will start again once it has...
If the blocks are lower than the ends it is an easy fix! take the bolts off the block so it floats add then try different thickness packers to get...
@SBLabs I wonder if you have nut blocks that are not centered exactly in the block or if your end mounts/nut block standoffs are not the correct...
cutting 50mm thick ali. and iron on a router sounds like a bad idea and I think you really should be looking to build a mill if that will be your...
Nice build but it just really backups what I'm trying to say.... To me I see a BIG build, BIG spindle running slowly at no where NEAR the full...
This is the vid I was thinking of www.youtube.com/watch?v=mRtIxG2co5w Don't worry about being new and asking questions, we were all there once...
How can we stay in the loop as keen to get my hands on this when it is up for sale!
Not to be a spoil sport but mounting 2.2kw of power to any thing other than a VERY robust frame may not be as handy as it seems. If the WHOLE...
I wonder if we could setup a teamvier/remote connect session (as I live down at the bottom of the world in NZ) ? It would be even better if we...
Sounds like a binding issue but a few other things to keep in mind is to maybe try and drop your micro stepping down a little and see if that...
Feel free to email me at [email protected] your Vcarve file if you want me to have a little look over it. I would mainly be looking at your...
Having good directed compressed air is a HUGE help for ali. cutting. It will both keep the cutter much cooler if you direct the jet to hit the...
I would also check my CAD and CAM very closely as i find that often than not when I am out by round numbers its not steps per setting. Wrong size...
Following as a friend has asked me to make him a paintball marker stock for him as well.
Makes the wheels MUCH stiffer as they are supported from both sides rather than being cantilevered. The down side is that you can only mount your...
