Separate names with a comma.
Some features disabled for guests. Register Today.
Some of the other queries you had 1.Yes. Received English Manual with box 2.No potentiometer 3. Input& output terminals are the same. I have a new...
sorry for the delay. I've been sorry for the delay. I've been out of action for a while.I checked them & found pd 177 = EoUd, 178= ELun,...
Thanks Mate. A great job.Mine is a HY series inverter & this all checks out OK for this model as well. A really thorough piece of work!
@Moag Further to your problem re shielded cable at reasonable prices try Homann Designs!, Your preferred CNC Supplier for Aus. supplies. This...
I have no idea of the brands. They are "no name" items from eBay. The spindle is 1.5KW 60 X 210mm air cooled. I've got 6 metres 4 core to go from...
Make it soon, Mate. Mine is due this week!
@Moag. This really shows me up. My standard measuring device is a old plastic ruler from when my kids were in Primary School! I know the eccentric...
@Rick 2.0 I hadn't read your note until this evening. As you'll see in the reply to Moag I found my way around the problem. Not nicely, but...
@Moag I spent some hours this morning trying to adjust it with your method. I wasn't what I would call successful. I could adjust so that the...
Despite following your learned advice & turned them 180 degrees, my attempts to be a rebel are a failure. I have a weird problem with these new...
Moag, You promised a good machine, bu this one is GRRRReat!! but I have a question re assembling gantries. Why do the eccentric nuts always go on...
Open Builds Ultimate Controller Open Builds Ultimate CNC Ultimate CNC Controller Ultimate CNC The Ultimate Controller Open Builds New Horizons CNC
Thank you. That's great.
Will you publish the updated plates etc. please? My OX is getting weary & needs a transplant. I've been thinking about ballscrews, so this could...
You could launch a Saturn V off it!@
Prolonged Drum roll!
Don't whinge about getting old! Make the most of it, it will stop soon enough!
I've got the earlier Nema 23 steppers which are half the torque of the ones you are using. I've got the big ones for the new machine. I am very...
Well, on closer inspection, I was already on 800, so I went to 400,with some small improvement. I tried putting the current up,2.8 up to 3.2A, no...
