Separate names with a comma.
Some features disabled for guests. Register Today.
Keith Davis published a new build: A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid,...
When I put the BOM together for this, it was more expensive than an alternate design I had. So I built the other one.
Sally The 670mm worked 670mm or 696mm endless gt2 belt The way to synchronize the two Z belts was with the set screws on one of the pulleys.
Hi Selvakumaran Contact form at 3dwrx :: Support
I finally got some pictures of the OneZ i3 today. So tomorrow (I hope) I'll be starting a new build project here at OpenBuilds for the i3. My...
That did not work well @jezter6 . I changed to using a min-v-wheel kit. [IMG] But, the design is expensive and other than it's unique layout...
YES on the eye protection. No sweaters or stocking caps - or beards - either. Finally got tired of combing alum out of my hair too, or finding...
OneZ i2: The i2 contains a radical change to the Z axis, and a new controller board - the Sainsmart 2 in 1. The Z axis motor is now positioned...
Fundamental engineering question Steve - have you measured the stairwell? Will you be able to get this out of the room it's built in, or is it a...
Thanks Carl. I would assume that is probably where I got my copy of the Unnamed+mechanism.jpg.
Hi Don I've done a bit more design work on this that incorporates points you and Lukas have made. [IMG] This type of design (fixed bed) is...
@Selvakumaran I worked on a Crane design with a C-Beam for Z axis last spring. The only problem I had (which made me shelve it) was the joint...
@Selvakumaran, I bought it after you gave me the link, so I can't tell you more than you know. Wish I hadn't though. Like @Rick 2.0, I've looked...
My suggestion? Buy it! I just did... That looks perfect. It states it has a 1mm pitch, so I am guessing it is a lead screw with only 1 start,...
Selvakumaran Sorry for the confusion. A Tr8*8-4 and a Tr8*8-2 both travel 8mm per revolution. The first 8 is the diameter, the second 8 is the...
Thanks Lucas. Another 50mm deep and I can fit the PSU, controller and a spool back there with the bowden driver above the spool. But, another...
Keith Davis published a new build: Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate -...
This is a design I've had in my "spare parts bin" for two years. I do not remember where I saw the layout, and the image for it was named...
Yes, you can use decimals for all 3 axis, if you want to get into it that deep. Bragging rights for marketability are usually at 0.05 resolution....
What I liked in your 25mm cube photo was the sharp corners. That means that your travel is spot on both X & Y. (Yeah, that single wheel you are...
