Separate names with a comma.
Some features disabled for guests. Register Today.
I'm running 2000mm/s for acceleration, but the jerk settings for Smoothieware don't translate to what Marlin uses. Can't hurt to play with the...
Not that I've seen. Large arrays of violet or UV LEDs is a pretty specialized application, so they aren't that common. I'm sure that there are...
Certainly an interesting read. Using sodium hydroxide (lye) looks to be the best option to the average hobbyist, as it's easy to get, and not...
Two things with regards to the LED boards. The cheap Chinese LEDs that would go on these boards might have either the anode (positive) or the...
Y-axis hasn't been a problem for me after I backed off the backlash a little. I had more noise from the Z-axis at first until the vertical C-Beams...
That looks like it could be a good platform to start an array with. There seems to be a number of boards that would work pretty well for the...
That's certainly a good option
Those look good. Ballscrews and linear rails are always good things to have for accuracy. The Nema23 isn't really what's going to define your...
XP-E LEDs are some of the best out there. You can also look at the Cree XT-E royal blue, Luxeon Rebel ES royal blue, and Osram Oslon royal blue....
Twist like that is more likely to come from the extrusion house or after tempering rather than created during shipping/handling. Not much that the...
A bit of background first about me. I've been working with high power LEDs for about a decade now, and have been implementing them into reef...
Probably not. They just aren't powerful enough to be able to get reasonable wattages under the area of the LCD. You would need to cram about 10...
Add to that one or more constant current LED drivers. I can make a few recommendation on that, but the final answer will depend on how the LED...
Don't mount it on the machine. It's nice in the fact that it makes the machine compact and self contained, but puts all the important parts in...
If you are going to buy a Ramps board, drivers, Arduino Mega2560, hot end, extruder, and now looking for a 3D printer frame, why not just buy a...
I bought both the 5.5" screen that's in the D7, and the 8.9" HDX screen that's in the Slash. To control the LED backlight, I'm sure there is a...
I was actually just about to post that link :D So, looks like it's a 30W LED. That's a lot of power in for not a lot of light through the LCD. Oh...
So, this is **** funny :D I was hunting around the web today looking for additional information about the Wanhao Duplicator 7 and came across...
Slash3D is using a 460-470nm blue LED array, which falls within the transmission range of the color filters and polarizer. It will be pretty high...
Oh, no problem. So what they are doing is modifying the case for the LCD so there is no back, and no reflective films like you would normally...
