Separate names with a comma.
Some features disabled for guests. Register Today.
One problem I see with using multiple smaller heaters is that you may run into uneven heating across the plate. There will always be some...
The smaller 175oz/in motor is what comes with the C-Beam bundle, and is what I use on all axes. There wouldn't be any point to going to the larger...
The slot spacing has to be multiples of 20mm for the other parts to be directly compatible. You will lose support for v-wheels with the likes of...
The Nema23's are the standard ones sold in the OB store. As for the driver channels, alpha is my X, beta is my Y, gamma is slaved to delta for Z,...
The Nema23 motor that comes with the C-Beam kit is more than up to the task of moving the bed around, even if it's a little on the heavy side....
Thanks for the praise :) I had actually thought about doing just that; having a single Z motor and tying the two together with a belt setup. I'm...
In the Slic3r options, go to the Print Settings tab, and click on Advanced on the left. That will give you the options for adjusting the extrusion...
I guess I haven't made enough parts with holes to comment either way on that particular issue. I know in Slic3r you can set the extrusion width...
Dropping the acceleration might help, but it's also dependent on what the actual problem is that you are seeing with the holes. It may actually be...
It's 365nm. These are mercury arc lamps and mercury has a large emission line at 365nm. [IMG] I'm still planning to playing with adding a...
How small of a circle are we talking about? Jerk settings (junction deviation in Smoothieware) I left at the default for Smoothieware. I did have...
I ordered some resin today. Maybe having that inbound will get me to put some time into this printer :) I ended up ordering a bottle of the...
Nice. Looks very similar in setup to my C-Beam based printer.
I'm going to say you will need a mounting bracket. The TrueUp extruder mounts to the X-axis carriage using what I can only assume is a machine...
I never got hooked on the SPS craze. I like my zoanthids and LPS. I've had some SPS, but I've always kept to easier ones like montipora and the...
Absolutely! Most of them fell into a bit of neglect once the kids were born, but now that they are older (daughter is 4, son is 2), I have more...
There's lots of ways I could search for it, but that doesn't mean I'm looking at the same product as you. There are tons of SLA printer options on...
My resolution is to add more resolution... ...by finishing my LCD based resin printer
I'd go the other way around if you want to use belts somewhere. The Y-axis will be far heavier than the X, and as a result will experience more...
Only thing it really could be is a wheel issue. Make sure that the eccentrics are set right putting the right preload on the extrusion, and that...
