Separate names with a comma.
Some features disabled for guests. Register Today.
I have been thinking about this some. What if I stacked the second extruder over the first, but offset so the tube has a straight shot to the...
Here is the link to the one I bought on Amazon. They are out of stock on them right now. Just bought another one on eBay for about the same...
13Ncm(18.4oz.in) holding torque About 5.6 oz. Do a Google on short body NEMA 17
I guess you could set (0,0) where ever you want and just adjust movement accordingly. Since 0,0 was in the front left on my Printrbot, that is...
It is NinjaFlex. It is a bit old as I got it some time ago but just haven't used it much.
Yeap. Need to play around more with the settings and try to get it dialed in better. But at least I am getting a good bead when extruding.
I have about an extra 30mm on my X. When Y is at zero, the nozzle is at the front edge of the plate. When all the way back, there is still about...
Tried with the wiping on and it was just as stringy as with it off. Need to play around with it some more. Need a smaller model to test with...
Right now I have more X that I can give up than Y. I'll probably leave this on the back burner for awhile. I have another printer I am working...
I had thought about that option. The alignment, as far as printing, shouldn't be much harder. The nozzles could be lined up so there is only a Y...
I've done a preliminary version of the E3D Titan Dual carriage. I haven't printed it to test and I don't have another Titan to use for a test...
Missed that part about the Buildtak warning, but haven't had any problems with it on mine. I did have some ninjaflex not wanting to come off, but...
Went looking for a model to try printing with NinjaFlex and came across your squishBall. So set that up and started printing. Thought I had...
The temp difference could just be in how the hot ends are built and report temp. With my E3D's I use thermal epoxy to set the thermistor in...
So it looks like I had my temp too high when I tried printing with NinjaFlex earlier. Set my speed to 30mm/sec, nozzle to 220, bed to 50 and got...
There have been a few people that have gone with dual bowden extruders, but most people wanted direct drive, which because of the weight of the...
What bed temp do you use?
Just tried printing some NinjaFlex. While I was able to get it to come out of the nozzle, I don't have the settings tuned in for it to print...
