Separate names with a comma.
Some features disabled for guests. Register Today.
In regards to the difficulty moving the Z axis, that could also be caused by the nylon nuts I am using. The ones I ordered won't be here for a...
Status Update. Got all the extrusion cut to the proper lengths and the basic frame assembled. Been spending most of the time modifying the parts...
For my build, I designed a belt clamp to use so I didn't have to use a closed loop belt. [ATTACH]
Must have over looked them. Will go back and check again. Thanks.
I would appear that my printer made the hole for the nut just a little bit too big. Can only get it to spin around in the hole. Will have to try...
Are there STL files for the parts other than the glide?
Keith, In the kit assembly guide, there is very little information about the Z End Stop screw other than to thread it in. There is no information...
On my build, I have gotten all the extrusions cut and have put the basic frame together. I mounted the bed today and found that when I slide the...
It's not that they are just a little too long. A couple are over 100mm too long.
And the latest mockup with the Z motor mount [ATTACH]
Picture time... These are just test assemblies until I get the V-Slot cut to the right length. The blue corner brackets are just temporary until...
Just uploaded the first set of files. These are the left and right feet, front foot, Y motor mount, and Y mount bracket. I have been putting...
New modified parts added (red parts). Because I will be drilling my own build plate instead of using the OpenBuilds one, I can guarantee the...
Well, my CoreXY printer went from this... [ATTACH] To this... [ATTACH] That was my first attempt at building a printer. Learned a lot from...
12" Amazon plate in place of Openbuild plate. Do you have a link for the one you ordered? Finding several different ones but guessing most any...
Okay. So you already added in the extra. Just to be sure, you're saying to use the plate from Amazon instead of the one from OpenBuilds?
Where did you get your plate from? Since I am using 20x40s, would that put the spacing 140? The distance between the insides of the rails will...
If you want to work on the other parts, I won't object. Just didn't know what the final spacing between the Y rails was going to be. Everything...
The one from OpenBuilds you show in the BOM. The spacing for the Y rails will be different since I am using the 20x40 at the moment. I want to...
Thanks David. You can probably tell by my images that I use OpenSCAD. I haven't started modding the parts yet as I am waiting for the build...
