Separate names with a comma.
Some features disabled for guests. Register Today.
I normally communicate with the Duet over the web interface. I have only connected directly to it via the USB to flash firmware. And with the...
I'm not sure how different the core RepRap Firmware is from the Duet's version but here is my sys folder.
I know it is not the same system, but when I had to flash firmware to the Duet board (Due based), I didn't have to add the port. bossac would...
I always use a thermal epoxy to set my thermistor in place. It eliminates any air gaps between the plate and thermistor. I also use strain relief...
@IanT Glad you got it working. When I did mine, I had no idea anyone else would be interested in it. Glad I have been able to help out.
I found that other post. Did a search on my posts so only had to go through about 5 pages to find it. :) C-Bot
I posted some a while ago, but I'm not going back through 88 pages to find them so I took a couple more. There are two independent runs of cable...
I'm not sure exactly what you are meaning, but here are a couple close up pictures of how it is mounted. Hopefully they will give you the...
I originally used the direct drive version of the carriage and it has a tab on top that I mounted to. I now use a carriage for the E3D Titan...
@pushpreet Didn't see your original message asking about this, but since I did my setup based on @CapnBry setup, I thought I could share some...
Here you go.
Doesn't look like it is just a screw on type mount like the inductive sensors. Since I don't have one, I'll defer to what is already there. It...
Not sure what the diameter of the BLTouch is. If you are comfortable working with OpenSCAD, I can send you the source file and tell you where to...
Here are the STL files. There is one for the back, and 3 different front ones. One with no Z-Probe holder. One with a mount for a 4mm inductive...
I tried them out too. They made me sick. But that wasn't too surprising. I get vertigo on the ride simulators too.
@akneipp I'll try getting that sent out tonight when I get home from work.
I had thought of getting some stiff wire from the hobby/craft store to do that. But I like the cable chains so spent probably twice as much on...
I have tried that several times and it just keeps flopping over. Can you give a link to the tube you used?
I have had some screws come loose. If I was building from the start, I would use some thread lock.
So the main offset is in the Y axis and both are on the same side of XY bar?
