Separate names with a comma.
Some features disabled for guests. Register Today.
Its has landed, wont sleep until i get my hands on ones of those !!!! Congrats OpenBuilds Team
Also called stranded wire
@msdosfx Im running OSX Mojave and i dont have that issue. I assume you have the latest version? This was something happening many version before...
Yes you can ( i have not use one ). This is some info to take into account. Configuring RepRapFirmware for a CNC machine Not sure how extensive...
I felt since i needed to place them vertically, 2x4 would give me more rigidity specially by the way the x axis is attached to the y plates
Why no give OpenBuilds CAM and Control a try. I design in Rhino but use the OpenBuilds Control for sending my gcode. You can get it at the top of...
You can verify if the USB is recognized on the Device Manager
All plates that are open source will have the CAD available
Fixed
@2x3 CNC mine is not a real smoothieboard and its very different than the board you ordered. Here is the picture
@Naiggel Be cautios of that information and always test if you are not sure. You can always speed up / down if you are using for example the...
@Naiggel DOC = Depth of Cut. Means how much the Z axis will go down per each pass
I would go with something proven to work, here is a link to a build with detailed instructions on connecting the laser to the K40 PSU. K40 ACRO...
By no means im an expert just sharing what i did. My connection is just to the GND on mosfet of my smoothieboard. Do you have access to the...
Have you fixed this ? (Has resuelto el problema)
@FabLab42 Im interested in knowing how have you measured your k40 clearance to be less than 0.1mm?
Do you plan to use the same linear rail as they? Why not convert some opensource plates?
Do you mean wire them to the board? Or the Config? Have you told the firmware this is and HBOT ? If they sound funny, without moving its either...
I have connected my board to the laser with a single cable by using the L on the most right connector of the PSU. I have it like this for more...
Have you tried flashing with OpenBuilds Control? Has great feedback interface can help you troubleshoot. Does soft limit work?
