Separate names with a comma.
Some features disabled for guests. Register Today.
The jig seems like a good idea.. I had no idea what I was doing, but luckily the tap that broke did so at an angle, so I was able to pull it out....
What are you using to tap them? That was one of the parts I was most worried about, but aside from the tap I broke it turned out to be pretty...
I'd love to have one! I wouldn't mind paying for shipping/parts though -- otherwise I'll be sure to pay it forward next time someone needs...
There's a chain called Metal Supermarkets that has a local location.. I figured I'd take in my heat bed so they could punch the holes in the...
Sorry, one more question.. How thick should the aluminum plate be? I was going to go with 3/8" since that seems to be the sweet spot for...
I haven't ordered an inductive sensor yet.. I thought I might try manually leveling first to see if I really need it. Is there a variant of the...
How rigid is the surface? And is it possible to drill holes in it without it cracking/splintering/etc? I was going to pick up a piece of MIC-6...
Thanks for the reply! I hadn't considered that it's going to be used with a flex coupler anyway. I'll hopefully have my steppers in tomorrow, so...
Probably a dumb question, but how straight do the lead screws need to be? I just got mine in the mail, and of course they're bent. It's a good...
I'll I'll take a pic next time I'm at the printer. Here's the mod I used though: A-Struder by nebbian The only difference is I used springs...
Do you have your extruder suspended above the effector on your delta? I just set mine up that way and it resolved all my long-standing extrusion...
My carpenter square always shows at least one corner out of alignment once I've finished.. I probably have a piece slightly short or long...
Any tips for getting a perfectly squared build *after* the frame is assembled? I have spent the last 2 night trying to do this and seem to always...
Ah, okay. So the significance of the dimensions specified is just a requirement for the spring to fit, but anything in that range should work?...
@Elmo Clarity Have you tried swapping the motor connections? If the tilt reverses it might be a bad motor. I'd say it might be a bad motor...
How much play should the XY bar have? I have the frame mostly assembled, but had some difficulty getting the bar tight enough to be completely...
Question on the extruder spring.. I really don't want to shell out $10 + shipping to get a special spring. Would this work instead? I'm going...
Just out of curiosity, what's the primary difficulty with printing nylon? With PETG my issue has largely been that it will produce a little glob...
So now I have to ask: where do you get your brushes? Also, I'm out of PETG at this point and I'm wondering if I should just switch to nylon...
