Separate names with a comma.
Some features disabled for guests. Register Today.
I also use some similar to Rink that I made out of oak. These are held down the same was as those mentioned above. For one sided 3D carves, I...
I could not find any photos and I would have to do some serious disassembly to get at them. Basically, on my shaft couplers there are two set...
You should grind a flat where the set screw from the shaft coupler touches. I have done that on all my machines and have never had one slip.
I have a 3D printed version that work great. However, I used 1/4-20 bolts to make them compatible with my t-slot. I also have a grid of 1/4-20...
Sadly I have not been able to find reasonable 1/2-10 5 start anti-backlash nuts for quite some time. You can get 1/2 - 10 5 start precision lead...
I am able to see the angles when I look at the link. I just added them to my Vectric database. The only blank ones I see are the flat endmills...
You should not re-zero x and y if you are doing everything right and your dowels are tight. Only Z. You should watch this video: Tutorial Browser...
If using vectric software, make your dowel pin holes where you want. the best is to use 3 so you absolutely can not flip the material the wrong...
You say Are you manually jogging, or is it "framing" where your engraving will be? Does it burn when jogging around without the test fire...
I would use 4 blocks HGR15 and I would assume you would want them 250mm long.
I am also not quite sure I understand what it is you are trying to do. Are you not just doing a two sided cut because you do not have thick...
Rack and pinion is probably your best bet for the 2200mm axis. Another thought may be a dual belted system but with much heavier grade belts. You...
Looking at the gcode, it looks like you zeroed on top of the piece. Did you use a touch plate? Also, what did you put in the boxes (Start Depth,...
Did you ever calibrate the machine after building it? Openbuilds control has a calibration "wizard" that makes it easy. However, for the most...
Has it happened before? Most likely caused by the computer/laptop disconnecting the usb port, a bad usb cable/loose connection or...
Also, the grbl 3.0 boards have been obsolete for a long time and the z probe pinout is different than what grbl 1.1 uses. I really wish certain...
Did you set the machine up as a two axis (no Z) machine? When homing it always seeks the Z first. If after trying for a period of time, you will...
