Separate names with a comma.
Some features disabled for guests. Register Today.
I think those videos Peter linked show it better than any picture I can take of my machines. Besides, I built them as the videos show.
There is hearing protection available. I use it all the time due to the noise of both the dust collector and the spindle.
I did not know that. How often can you download the trial version.
Also, never rely on the coupler and the bearing in your stepper to hold the screw rigidly. There can be internal play in the stepper motor. There...
If your laser mount came with a drawing showing where the beam is centered, and you know it is in line with the endmill, then using that...
I have not yet upgraded to V 12 of Vcarve so I can't open that project. Did you cut out the board, or was the board pre-cut? Was it slightly...
It is probably M2 or M3. If it were me, I would not replace it with a grub screw. I would replace it with a socket cap (if there is room. That...
I have used a 12 foot USB cable for 8 years with no issues. But it is just a simple CNC Router, not plasma. The cable runs well away from...
What kind of sensor? If inductive, is it PNP or NPN? If you are having issues, microswitches are easy, cheap, and accurate.
I run 1 meter on a 1.5 meter axis. I just mount one end to the tool head/Z axis and the other to a point on my support piece the chain is fastened...
If it is erratic, then you may have a loose wire in you z Stepper cable.
I use one Y set of wires because the rotary axis only has one stepper motor. You need to unplug the other Y or that side will try moving when Y...
If using the Demon Post processor as is, you could use either. But disconnect both from the Y steppers or one side will try to move. That post...
Yours appears to use Openrail mounted on the extrusions. Here is that product page. There is links to assembly directions. That may help. OpenRail...
To get a good accurate calibration, put a pointy endmill like a V bit in and jog it at the longest distance you can next to a measuring tool. The...
That appears to be a custom built machine probably from before their were OpenBuilds machine kits. I would maybe take photos and sketch the parts.
Did you install the drivers as per the documents? docs:blackbox-x32:install-drivers [OpenBuilds Documentation] Did you troubleshoot the USB...
Earlier, I read your post that you deleted. Just getting around now to trying to help. 1) Have you homed the machine before doing anything job...
Start with that, but recalibrate the axis that you changed.
""
