Separate names with a comma.
Some features disabled for guests. Register Today.
If using Vectric products, highlight the .dxf file then press either the 9 or 0 button. that will rotate it 45degrees each press if I remember...
I zero at the machine bed so I pretty much only use mine upside down. :)
@DrDarin I went out and took some pictures of the parts to determine what number and length of screws I used. 4 angle brackets for each base of...
The cbeams linear axis kit comes with the necessary lead screw for the x axis. The high z comes with the necessary 540 mm lead screw for z.
Upper or lower wheel? The lower do not bear the weight so it may not be noticeable. It may not on the upper either.
You can't fully use it without it being connected. At least mot that I have found. I have a cheap arduino nano I keep next to my computer with gbl...
I have hade one break before and was able to run without it for a short period of time. What machine is it and how many wheels on that axis?
There are stepper motor arduino sketches that do not require grbl. The easiest would be a plain old breadboard. I am not aware of any others.
The support is excellent.
If this is for a CNC Router, those DRV8825 drivers are underpowered and have a tendency to overheat. They work great for lasers and other...
Wow! You cut those materials at that speed? Maybe I am too timid. I only cut at that speed for 3D carves where I am only taking a 40% stepover....
I would say that it is an upgrade, and you can add a 4th independent rotary axis if you want. You can look through the specs to see what it can...
You can get a BlackBox Motion Control System X32 and use OpenBuilds Software: OpenBuilds CONTROL and OpenBuilds CAM - FREE software to run your...
Since this is a custom enclosure, I would go to the parts list located here: OpenBuilds Enclosure Series for all the hardware, then order the...
Did you by any chance for get to set the Z 0, or had you changed endmills and did not re-zero the Z axis? It is a mistake I will make every once...
""
This is great! Some day I hope to build a plasma cutter.
I have always jogged all the way to the front of the machine and made both sides touch the front beam. My machine was built square so I know if I...
I believe it will be helpful. Thanks.
