Separate names with a comma.
Some features disabled for guests. Register Today.
If you are trying to make it so the base of the letters meet the wood at a 90 degree angle, I would thing that a pass around the vectors that...
https://www.instructables.com/Control-a-Large-Linear-Actuator-With-Arduino/
Windows 7 may be your problem. Prior to OpenBuilds Control, what control software did you use? A couple of years back, I used it with an old...
I only know of the Rotary Demon Post Processor. Sorry.
You would most likely need one with a 1500 mm axis on either X or Y (or both) since a bat can be up to 34 inches. You may be able to squeeze one...
I got some of similar ones for my momentary switches on mine too. But, I was dumb and ordered 12V and I have a 36V power supply. I guess I can...
It is listed in the documents under "d)" here: docs:blackbox-x32:layout [OpenBuilds Documentation]
You are welcome. I am glad you got it working.
I do not know and I am not near my computer to look at the post processor. I would not be able to look for several hours
Use the rotary demon post processor here: Rotary Demon Training It coverts mm to degrees.
Can you not import a step file into solid works, move the end plate 250mm, then extrude both the extrusion and screw? That is how I did it in...
Also, there is a very helpful manual if you click on the "?". [ATTACH]
I use the RoutER11 on mine. I do as Peter said and monitor it, then adjust the speed dial on the router up if it sounds like it is struggling...
I run both the same (2500mm/min) with the depth of cut 1/2 the diameter. For 3D carves where the roughing pass is only doing a 40% stepover, and...
Make sure you check your spam folder. Some spam filters send the OpenBuilds emails there.
If you only need one driver and want and easy hook-up, an Arduino and a DQ542MA driver. Then use the wiring diagram here: C-Beam cnc (scroll past...
Thanks. I made a series of Star Wars Tikis for the IT people that work with me. They are Hex 3D models. He does a lot of SciFi 3D models. As...
Yes. I bought some (according to Amazon, on March 13 2023) so that each collet now has its own nut. I am lazy. Also, an 8mm ER11 collet is nearly...
I have found some longer 8mm ball nose and regular end mills I use for roughing out deeper 3D carves. They are fairly stiff. You can get 8mm ER11...
Every other hole you see on the strips between the T-track are used to screw those pieces to the layer beneath that the Ttrack is attached to....
