Separate names with a comma.
Some features disabled for guests. Register Today.
It's just the scaling on the xPro output not calibrated to the input. As for the xpro being used on a system with a 2.2kw spindle, just a bit like...
Hi Yamionxtc, What I would do, Trial and error your min-max setting to get close enough. Or there may be a calibration for the 0-10v scale on the...
I bought a 4 pack for something like $9 on amazon, they come in handy Glad you got it sorted. Gary
Hi stumpy, the polarity does matter (it is labeled + for red and - black ) and make sure your power supply is set to the correct input voltage...
Hi Phoenix, your speeds and accelerations are a bit aggressive and can lead to the step-loss and chatter, try 5000mm/min max speed and 500mm/s^2...
Gregers, The button looks like a home (top middle).. Yes $23 lets you invert or reverse any axis you want so if you hit home and it goes the wrong...
Dual belting will get you big benefits for cheap with 1500-3000mm belts. Just make sure to do it correctly :) Cheers Gary
i tossed the G-code you posted into UGS and it looks like nice smooth curves to me. Post your $$ settings from your xPro. This is belted?...
win 10 tablet, make sure to check the usb suspend setting
That speed should be fine, what is your acceleration?
Hi Tyler, I'm thinking you need to increase your current and/or make sure you are not too aggressive on your speeds and accelerations. You are...
Hi Tyler, looks like classic flex coupler issue with setscrews not being secure or not on the flats and it's slipping (use loctite). could be some...
Hi Gregers, it's a bummer you are having so much trouble, maybe I can help with a couple (3) items. 1) reliability is something you need to work...
Hi Slade, Please post your $$ settings, probably something different between Y and X and Z, too fast acceleration or max speed can cause the...
yes, like this... try this before doing anything drastic. Gary [ATTACH]
I'll have to check that out, Arduino IDE is bloated (more features than i need) and confusing IMO. Gary
12v low power wall warts are cheap, so are 24v pc fans (ventilators) :) Cheers
To counter the backlash keep the system loaded with a spring or rubber bands, just strong enough to keep the gear teeth all contacting on one...
My setup is in my basement, I have a small home of 1500sq' when running long cuts I'll go upstairs and listen for the vac system to shut off then...
Could always use a 40A SSR like I always do and wire yourself, if comfortable with that. In rush, on a router With variable speed is not much as...
