Separate names with a comma.
Some features disabled for guests. Register Today.
Unfortunately that inductor is broken, send an email to the parts store support http://support.openbuilds.com/support/home Regards Gary
Would be really cool if you could link 2 or more Blackboxes for expansion...
I like this except an experienced ME would (should) scoff at using WD-40 (except for use as cutting fluid in a pinch) ;)
Are you sure its the nut? the motors can hit a resonance at some slower speeds which can be rather loud. A short video posted here can help....
grease :)
Peter, couldn't he use the Aux? or does that aux not do that? From the pic to me the Left side of the plug looks bent outward, hard to tell, could...
According to this fan speed calculator you would need a 120Ohm 2W resistor... Or one of these converters Cheers Gary
Make sure the coil wires are paired up, don't assume the wire color means anything. Also make sure in GRBL the $4=1 not default 0 Gary
I would not waste my time, whole house vac systems are not "grounded" and they use pvc pipe, my shop vac hose is not grounded.. You really can't...
Like Alex I didn’t bother for the longest time, close enough with a square resting on the spoil board and sighting the spindle body gets you close...
I agree, start tramming! Cheers
Hi XelNaha, Something does look loose, maybe your collars on your z are not tight or your getting screw flex in compression on the longer axis?...
Don't hit them with anything.. press them together with two flat surfaces, like a table and a small plywood board. Some can take a bit of force to...
I've used Tinkercad to make 3d STL files, which Estlcam can make cam with, worked out well, takes some practice and fiddling but doable. Tinkercad...
Another option is Valuehobby.com they sell some of my rc airplane designs... I'm using the 269ozinch motors from there no issues (out of stock on...
You can also go direct with steppers online, not sure if the shipping makes up for the amazon price.
David, You talking about this one? Up to 24v 5A switched output for coolant devices such as 24v DC pumps, solenoids, contactors, or Solid State...
Jeff, When calibrated for 8" how far off is 2"? Gary
Hi Jeff, so after calibration you are off by a mm? not sure what you are saying in your description. Can you post your $$ grbl settings? could be...
Hi Armadillo, As long as "yellow and green" is a coil and "blue and red" is a coil you will be fine, A or B doesn't matter. To change the motor...
