Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Ollieg, not that I have seen, just get any old pc to use dedicated for it. I have an old Dell xps Core Duo (2 whole cores!) with 4gb of ram and...
V-carve is a CAD/CAM package, Not a controller. Doesn't care what hardware, just makes drawing and g-code files, there are Post processors to...
If money was not an issue I would think V-carve pro or aspire would be a great option. I away's thought it strange that people use an art program...
There is a guide for setting the current somewhere... basically turn the current adjustment pot up (clockwise) until the movement is reliable but...
Circles look fine so it's something with the machine. Are steps being lost? could be current setting or loose connection to motor. [ATTACH]...
So many things can cause this.. 1) looks like from the tear out that you are moving too fast and or to slow on the RPM 2) wheels eccentrics might...
Hi Gazingm42, Picture? unless you are loosing steps it's not the motor, most likely it's the file or your sender not treating arc radius...
2000-1000mm/min is rather fast for home cycle, try slowing things down ( 250 feed and 500 seek should do, the seek should be faster than the...
Hi Curtis, Post your "$$" Grbl settings for us to check. You probably need to assign your home direction which is done with $=23 and this chart.....
I got this 50 foot 18-4 shielded from amazon or Ebay same seller Gary
Nothing like a new SSD and clean install of Win10 or 7 ;) I just put a 128GB SSD (they are ~$30 now) into my old dell core duo xps, fresh win10...
Hi PH, Problem with top and bottom is getting the rails parallel will be much harder if not impossible. Cheers Gary
Some people have chucked it in a drill and ran it up and down a few times to loosen, the two I have started very smooth and free, if it doesn't...
What I like about the Makita is the parts are cheap and the router itself is available globally and cheaper. From personal experience the makita...
Click on the blue link above :) or here Or I believe the arduino IDE drivers work too and have some functionality for other arduino projects.
Hi Richard, did you install the drivers yet? Cheers Gary
Hi Campbell, is the screw and the nut both from Openbuilds? their screw and nut is slightly smaller than other 8mm screws out there, so the nut is...
Looks really good I would say! judging from the file name I would say that's for a bottom bracket of a CF bike project? would love to see more of...
Dual belting is even better than going with bigger belts. [MEDIA]
I see nice circles, can you try running it with the z set above your work and see if it "air cuts" circles? [ATTACH]
