Separate names with a comma.
Some features disabled for guests. Register Today.
@bhalkett @Jestah Your orders have shipped and a pm has been sent Ty and let me know when they arrive
@JCPhlux Your diode housing and mounting plate are on the way, they said a week :)
At low RPMs it screams, 10,000 RPM it's tone changes and is a lot easier on the ears. See my video in the build log for an idea
Oh! Lol sorry just got up to a bunch of updates and pms Yes I have cut 3/8 aluminum plate as that is how I built my current mill. I only ever do...
No what you see in the pic is what I ship. The end user will need to get an RC 5045 with 8mm shaft, ER11 collet 100mm long, 80 amp ESC and 4 x M4...
Your kit is done, I just need your full mailing address for shipping cost [ATTACH] Going to the post office today, let me know
Your laser diode will only require 1 amp max for a long life of etching
None as of yet because I set the scale of my drawings to within the travel zone, also use a software limit in grbl
A 5 amp 12vdc will do the trick Taking a guess I'm going to say 3 amps
I was using limit switches but decided to switch to optical. Just have not gotten around to building them.
Sorry for the delay as I just finished a 16 hour shift at the day job. I'm not sure of the stock issue I just had a heads up as I was also looking...
I use a 10 amp 12DC power supply No, I'm now using a 1.5kw spindle. After milling all the 3/8 plate with my last RC Spindle I decided to go...
I believe the pulleys are due in soon
This would be my suggestion http://m.ebay.ca/itm?itemId=170898388161 I milled something up fast before bed and I did have the extra diode housing...
I have tried with no success but that may have bin on my part lol I'm just a hobbyist
Ok I will take a look before I go to bed
Let me see what I can do for the laser plate, are you planing on using a nema17 motor? I may even have a spare diode housing here some where
The current files are not uploaded but I will try to get them posted I should have enough plate to have a kit for you soon.
@Jestah All done! I have press fit the 608 zz bearings in place for you :) [ATTACH] Needed to complete 4 x 45mm M4 screws 5045 900KV RC motor 80...
I will try to squeeze you in ;)
