Separate names with a comma.
Some features disabled for guests. Register Today.
got my new dual shaft motors in for the X and Z axis. just finished reworking the Z also. my design doesn't require 1/8' spacer behind the delrin...
the SKP file is in the previous post, as far as the Z goes my buddy put it together while I was working on the gantry, here is a couple of...
did a little more work on it yesterday, finished the mono rail to guide the vacuum hose and power to the router, updated the firmware in the TinyG...
there are 4 on the lower X wheels and 4 on the left Z wheels and on mine there are 2 on the mini wheels on the inside of the c-beam on the Z
good idea. here are a couple more pictures , getting closer to a finished.......na never finished always tinkering, CNC router. Vacuum hose and...
here is a couple more pictures showing the position of the wire chain, as you can see I use the 40mm to also hang some clear vinyl to help keep...
yep, does make it stiffer. I haven't seen any real flex out of the Y as I did from the Z. I do have an inner plate made up if I had to go that...
I put the internal wheels on the Z but .....when we starter putting it together I hadn't looked at the specs for the wheels. the mini wheels are...
this past summer we got a Metal Supermarkets place 2 blocks form where I work. just picked up some 3003 aluminum for $30.
my plates are 1/4" 6061-T6 , what you see in the last picture is 11mm or 7/16 6061-t6 which we haven't tried yet. where I work we have a materials...
Haven't talked about the main hold down board, here is a picture of it. we had the machine drill all the holes. there are 5/16" holes tor dowel...
took a few more pictures this morning. pluss what I hope is the new Y gantry plates. will be testing them out in wood before milling in aluminum
Got my wheel spacing off these drawings, seems to work well. was finding some varying wheel diameter sizes, with the gantry installed and the...
yep everything is C-Beam. I did put the mini wheels into the Z-axis. but didn't take into account that the wheels are not the same thickness, we...
found this in the resources Anti-Backlash Nut Block (STEP) | OpenBuilds
you never get the amount of work done when a blonde is helping you
made them, I hand drilled the first plates then we had the cnc make its own replacements.
it is a rf remote for the single color 5050 led strips. I also have the RGB one but it is an IR, I put that into the sign I did for my nephews...
well I made a boo boo on the Y plates, I completely forgot to check the screw block fitment on the wood mockup. I had the holes 15mm apart instead...
Stayed late at work last night and cut out the Y Gantry...almost ready to
