Separate names with a comma.
Some features disabled for guests. Register Today.
I'm getting flex in both directions, we put a digital dial indicator on the X direction of the Z and got it to move a couple 1000's by squeezing...
done a lot of work on the machine this month, we are having issues with the rigidity of the Z-axis in the Y direction. we made new X plates and...
I am trying to create a gcode sender for the TinyG that doesn't require the internet to work. this is a start. I am not a programmer by trade so...
Haven't gotten as far as I would like, have worked on the user interface mostly, I haven't got any serial stuff written yet. we have had several...
Please don't use my gantry plates, we found an error that causes problems. somewhere we got solidworks drawings that weren't correct or something....
finished the spoil board today, lines up great with the main work surface, been working on a tinyg gcode sender. modeled after the grbl panel, but...
I ma using 1000mm beams all around, the gantry is very stiff but this week I notices several thousands wiggle in the x and z axis, we tore it all...
My coworker "Brad" lives 8 hours a day in solidworks did the drawings. we took the OX plates and did some mods. we are working on some new ones...
my coworker has gone for the day but I can get them, they are in solidworks. I had him make me a 1:1 pdf that I printed out to make the plates....
forgot to add this, I have bench tested my SSR's and they switch on at less than 1.5 volts so the tinyG can turn on the router and another device,...
here is some more pictures, haven't had much time to work on it. Getting ready to drill the main board with 5/16 holes for alignment dowels and...
Thanks guys, been busy at work so haven't had a lot of time to work on it. we did get to cut the first test. it is an adapter plate for a...
Got the 40mm and the 80mm attached to the gantry this morning. the 40mm will be used for the cable chain and the 80mm just ties the bottom of the...
Yep I have the motor step rate on 1/8. i think my problem was trying to push this monster faster than the motors could go and one would get out of...
Had my cad guy get me a picture out of solidworks so you could see what the end result will look like. our current gantry plates are nothing like...
if anyone is wondering about the holes across the bottom of the gantry, the plan is to run a 80mm piece across and tie the gantries together to...
yep, I got 4 to test with , then replaced all the load bearing wheels with the extreme wheels. I just used the regular wheels on the bottom to...
Robert Bailey published a new build: I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a...
