Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks so much @Mark Carew - could not have done it without you, your parts and the fine video you put together (which made the assembly...
Thanks @Davey Rance ! I'll be updating this thread as we move through the process. You have been a HUGE help, and I'm not quite sure if I would...
motopreserve published a new build: My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to...
This is the first time I have ever attempted to make a CNC machine. After some success with building a Delta 3D printer - and years of machining...
Hey @Calamari Looks like you and I have similar interests/goals for our machines. I just put together the Plate Maker from the OpenBuilds...
You could substitute just the parts that you need larger - such as the C-Beams (and components).
I'm in the final stages of getting my TinyG/plate maker build going and I need a little clarification. When I do the homing on the Z axis using...
+1. This would be very nice to have!
I confirmed with Mark before I purchased if he thought the 175oz (from store and video) would be an issue - knowing that was the one that came...
Sorry, I haven't even cut anything yet :). I am confident that it should cut fine for my initial needs (based on @Mark Carew video of milling...
I personally think you would be fine with a spindle that tops out at 24k RPM - in fact you may find yourself wanting to work more in the lower...
I think that's the one I'm on. I just still reboot for major changes, because I don't trust it :) Got the bed secure with bolts instead of the...
Thanks. I did reboot. I basically reboot each time I make a change and then double check to make sure that the settings have taken hold :)...
****. I'm not sure where it was linked :). I found it last night though after reading this post (and a couple others - perhaps from the resource...
Thanks so much for all the info. I have Sketchucam installed and running already based on your description from another thread - and have messed...
Thanks David. Currently, I have changed it using the controller only (polarity reverse in TinyG). I had planned on swapping the wires at some...
That's what I have always been taught. But in this case, the tool is moving opposite on the Y axis (exactly as shown in the drawing @Mark Carew...
Thanks so much for the reply. I have been messing around with both fusion 360 and Sketchup a bit, and figured this was one of the features of SU...
Yep. Saw that - and @Davey Rance had already mentioned trying something different on that part - so it made sense when I saw you all talking...
I can't believe I missed that. I watched it twice - but I think I stopped short since I was using a different controller. Great video by the way!...
