Separate names with a comma.
Some features disabled for guests. Register Today.
I didn't know they had a .4. When I bought mine a few weeks back that wasn't an option, it's also not listed on the identification table. I...
So, when you remove Z height from your bot, be sure and tell your firmware that you did. Was printing a large Ocarina last night when I ran out...
So it turns out that alot of my print artifacts were due to my extruder mount. I had been using extruded aluminum angle brackets, they turned out...
Wowie Eric. That might just be the coolest thing printed yet.
Back to printing tonight, one good calibration cube, one pla stormtrooper helmet fail. Dislodged from the glass, most likely due to not really...
I like your idler brackets, little longer.
Not having the stepper on the axis is a strong point of coreXY. Not having the wiring for the stepper moving is a big bonus. Keeping the weight...
Just finished up the new gantry and extruder mount. This one feels more solid then the others that I have used. I am hoping it plays nicely with...
Wouldn't your firmware really control point number 4. I am excited to see how this comes out. I guess you got your jamming issues straightened...
I am switching DC, and now I know that should use a few fets for this. I think I may also switch my bed to a 24V unit. Less Amps with more...
I had started my belt path exactly like yours, with the idlers mounted on a gantry plate. I found the my frame was excessively not rigid,...
I finally got Fusion360 all updated and figured out how to get it to display my cloud files.. heres the 3D model for the mini end stop. its not...
I did a post mortem on my smoked DC-DC SSR. I did definitely go bad. It was preheating to ABS temps, why im not quite sure, this large of a...
Here's a little teaser, I will post some more pics over in the triple C thread.[ATTACH]
Is there a shim between the two bearings in the wheels? that was my problem with my initial gantry installation.
Its strange, the pics are very similar. The cylinder was printed on my Rep1. My accleration is set to 1000/mm/s^2 with a max speed change...
Is nobody else getting the same vertical artifacts that Joseph and I are getting? I wonder if its somehow related to the Z stage?
@trublu832 here's the link. was posted just a page back also, its a nice tidy switch. I will dig out the cad model of it and post it, makes...
I will add my endstops in the mix, Carl and I share the Y axis stops. I chose the other orientation switch for my X and Z stops. The Second...
Round unsupported rods lose rigidity on longer spans. A 20x40 in the c-bot's orientation is much stiffer and probably good for .75M to 1M...
