Separate names with a comma.
Some features disabled for guests. Register Today.
My guess is you will need a DC spindle controller. Here is an example of one that popped up when I googled it: Amazon.com . It appears to accept...
If you have not done so yet, under "Setup" select "CNC programs/ post processors, then select "Presets" and choose grbl. [ATTACH]
If you are talking about this, [ATTACH] I checked his Thingiverse account and was unable to find it there. It is strange it was not added in...
I am way over a thousand miles from my computer so I cannot do any screenshots, but it is in the Set-up portion of the software where you can...
You probably already know this, but if it opens in Estlcam, you can save the gcode using a grbl post pricessor.
You can download the files and customize them. The original plates are here in the files section. C-beam Sphinx
Commonly available extruded aluminum angle worked for me. You can easily cut it with a chop saw to length and us a printed patter for the holes if...
I love the Openbuilds Down-Cut 2 Flutes Solid Carbide End Mill 1/4" end mill for wood working, but as Peter said, but a couple cheaper ones to get...
Prior to reading the following, did you use a power supply greater than 24V? If so, you probably did destroy it. If not, read on. First, confirm...
Also, are you 100% certain that the colors of the wire are correct for the power cord? In other words, is the green actually the ground? Or is...
I too like the RoutER11. It lets me use any size endmill up to and including 8mm. I really like the 8mm for removing material during the roughing...
From the X32 documents, Tool is 3.3V. So a 3V relay may be needed. [ATTACH]
Can you post a picture? That will help. Thanks.
Follow the advice in this thread from earlier today. Holes are not coming out round
I use a meter stick and send it 1000mm to calibrate. When doing this, my machine traveled 1000.3 mm. I would have never noticed the error by only...
Vectric Software is a quick and effective tool for breaking apart multiple nested panels if your work surface is too small, or if you want to cut...
In the past week or so, there have been several questions regarding tiling. If you have Vcarve Desktop and are willing to add OpenBuilds CAM to...
Wow! That is cool.
""
i do not know if you necessarily need them, I do not use them om my lathe, and have had no issues. That being said, I added them when i rebuilt my...
