Separate names with a comma.
Some features disabled for guests. Register Today.
Open the Post Processor and change P1.8 to the value you want and save it. In your case P3.0. Scroll down in the Post Processor text file until...
I have been using Fusion 360 for a few years and I am pretty much self taught. I thought I had a pretty good grasp on it until I heard someone I...
I just found this Youtube channel last night. Wow! It makes learning Fusion so easy....
There are flexible shaft couplers on the stepper motors. If the person tht built it did not get them good and tight and use blue loctite, they...
Are you sure a shaft coupler of tension nut is not lose? It definitely looks like a mechanical issue to me.
Connecting Grbl If you do not have a Protoneer CNC shield, the shield you have will not have the current pin-out for grbl 1.1 and will have to...
$1.25 now. I went to one recently to look for a cheap digital timer and walked out with 7 items at $8.75. ;) That being said, the funnel will...
If it were me, I would put lea screws on all axes. Belts can stretch and slip.
This video may be of assistance. I would assume that the normal OpenBuilds post should work since it is still just XYZ moves, but I have not...
The 5 mm hits 0% of my work-holding methods. ;) You could always write your own macro having it travel at a higher height.
Have you calibrated each axis of the machine?
I have never attempted to use Fusion 360, because I already had Vectric Vcarve Desktop. So, I can design in Fusion, then export the item as an...
One way to do it if you use Fusion 360 is to draw half of it looking at it from the side (minus the radius of the hole). [ATTACH] Then using the...
You could maybe design in the screw holes in your CAD file. Then lay the sheet on the machine and run a toolpath just for these pilot holes...
I had issues as well because I was unaware of how they worked. I was inserting them like a regular router collet and not snapping them into the...
I fastened my CNC to the torsion box using numerous Cast Corner Bracket s. Using a bench disk sander I sanded off the little bumps that fit in the...
@JVcustom, I just stumbled across this video tonight looking for ideas for sanding inside trays. He has a basic Vcarve tutorial that shows how to...
I can answer a couple of these from my perspective. I built a very heavy Torsion Box style of table top to mount on my base cabinet. It is made...
1. A) Make your work stock that exact size of the pre-cut piece you want to use. B) Then draw a pocket the sizeand shape you need where you...
I agree with the roughing finishing pass I pretty much do that on everything now. Also, if the hole is 4.5 mm or greater, I will use a. 4mm...
