Separate names with a comma.
Some features disabled for guests. Register Today.
Robert Hummel published a new build: This build is intended as a light alternative to the Dremal rotary tool. Read more about this build...
This is kinda what I was drawing out while my mill did the cutting I think it will work out. As they say ya don't know till you try :) [ATTACH]...
The 20x40 for the z axis, is it open/no plate at the bottom? I ask cause the RC spindle I'm making will bolt to the bottom of a 20x40 with m5...
Ty that is my standard practice but something funny was happening so I uninstalled and re-installed all software and plugins to have success :)...
I'm trying to Pocket a hole in 3/8 amluminum to a depth that will allow a 608 abec 5 bearing to sit flush. I have tried playing with the setting...
My local guy prised me $69 a 4x8 sheet 1/4 inch think Im going to ask for a sample and run it on the mill when I get my red plexi
I think the main concern would be how to stop the assembly from falling when power or motor control stops. With the motors enabled and right nema...
Yes in aluminum the best RPM and feed was 10,000 at 10-15 ipm. In wood ipm was all that changed to 30 and in foam I have no idea
Decided to check the condition of my 890KV outrunner before ordering a new one and happy I did. As I suspected bearing failure was the issue and...
very cool idea I have bin looking into a way to display the g-code being sent to GRBL on to a LCD I was thinking there may be a way to in a sence...
Man! the black OX looks sweet Im so building 1 for milling PCB and HDPE Time to bust out the 890KV Outrunner ;)
Thinking I may try playing with some of this to make plates for my future 3d printer Anyone try this stuff I hear its tuff to mill...
Great place to get plastics and other products. Local shop has a walk in $40 min order but selection and prices are the best I can find local...
PCB Layout and program to modify if need
Files have been uploaded, keep in mind when I mill my parts I dont use tabs.
Design your layout and print direct to laser printer does single and dual layer
The motor only gets warm to the touch at 12-14vdc and air flows through the motor due to the housing design. I would say from experience the main...
Here ya go dude just an idea of how it ran :) [media] Z Axis motor plate didn't line up so I made a wood 1 then milled a replacement :) [media]...
Yes that is the same concept and yes it is possible rebuild it. All that holds the er shaft and motor together is the press fit and set screws in...
link to GRBL hex and X Loader http://www.openbuilds.com/threads/laser-v.220/#post-894
