Separate names with a comma.
Some features disabled for guests. Register Today.
Sounds like a good plan for next steps.. As for a driver replacement, there are many 542 type drives, the ones from Openbuilds are excellent and...
Hi Dale, You can slave many drivers to one axis by running the step and direction signals in parallel to the drives. Cheers Gary
David, He's using Estlcam which uses mm per rev... I agree about the speed Cheers
I do not know, I will find out when everybody else does :)
Hi Rob, Depends on if you plan on using bigger nema23 motors or not, the xPro can do 1.75A (2.5A peak) per channel where as the BB can do 3.25A...
I think this is it, or something just like it... [MEDIA]
More info would help, what you mean by "problems"? and what type of machine you have? Could be lots of things besides rollers and screws.. Maybe a...
Nothing wrong with using the earth grounds all together, as long as the outlet you are using is wired correctly! That can be checked easy enough...
Hi M&D, Any pictures? what type brand PSU? what type speed control, 0-100vdc spindle? Do the PSU's have selection switches to run on 120vac?...
Hi szalonewrzeciono, make sure the lower belt is secured with the required 0.5mm of lift to get good interlocking of the belts. If the belt is...
Hi Pla, Several problems with a drill motor and chuck. First it won't be very true running, drills are known for bad runnout. Also, it will not...
Interesting, can you post one of your g-code files here as well? Also a screen shot of the tool setups. Might need to zip the code file. Thanks Gary
Something like this might work? 20-2568
I always forget how much mega's go for, when I can get an Uno for $16 and a Mega clone for $8. Let us know if you need help setting up Estlcam...
I agree, get a real Arduino either a Uno or Mega, then get a screw shield off ebay for it (makes connecting wires easy). Then get 4 drivers, I...
Hi Lexi, yes it will work with files made using F360... But, if you are committed to using F360 (an excellent option) then GRBL is sufficient....
I vote Estlcam With genuin Arduino Uno and 542 drivers, great bang for the $. Estlcam is its own firmware and easy to use CAM, can try for free...
Hi Ben, some of your settings are incorrect. $100 is set to 8, with the 20 tooth gt3 pulley this should be like $101 is set 26.667. $102 = 200...
mapping not working in the tool/options for UGS? It's been a while since i tried it. [ATTACH]
Sounds like a wiring issue. Curious why using an xPro (with external drivers) when a cheap Arduino UNO and screw shield are more convenient and...
