Separate names with a comma.
Some features disabled for guests. Register Today.
USB Cable? when you plug it in nothing is found? Gary
Hi Jeff, Yes you can use a keypad with UGS, you can setup the jog using any keys you want. If you switch from GRBL to Estlcam like I did you can...
Hi Jeff, I'm not sure what you have then, never seen a 1/2" 6tpi ball screw, maybe a 12-4mm .. but then the 322 doesn't make that work either.....
Hi Jeff, Good to hear you got it working! Depends on what micro-step you are set to on the xPro and what the lead is on that screw. Lead is how...
Hi Jeff, Yes it is possible to burn them up.. as can any electronic device.. the xpro can not take 48vdc, 24vdc max. The xPro can control those...
Hi Jeff, I think it is drawn that way because there isn't any more room on top. The steps per mm is determined by the microstep setting you are...
Hi Glen, Did you calibrate your xyz travel? loads of videos on how to such as this one [MEDIA] On estlcam settings are very strait forward, set...
Hi Vince, Did you follow the software instillation guide? https://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBController.pdf Also you could...
Got mine on ebay, 50foot length
This is in German but the first thing i thought of. Good luck. Also the ball end is done with the last part of the tool specs on the right side of...
I used to make RC airplane kits, had an issue with one postal worker who thought it was Ok to fold the box in half so it fit in her van better......
You are fine, it just looked at 0.0375/0.005 = 7.5 You have it set correct. Cheers Gary
Isn't (or now wasn't) that motor shield one channel? you need three axis, there are many cheap options (which will take 24V) out there.. I'm not...
Giarc, He's using an Xpro, but I agree the #7 is probably a carry-over from the Uno D3 is the probe on Xpro [ATTACH]
I'm guessing that voltage regulator is not able to handle true 2.5A like it says. What is the goal of this project? Maybe we can help. Is this the...
I don’t know why you would use that type of PSU, all you need is a switching constant voltage PSU, if you can set the one you have to a fixed...
Hi, we need more details to help. Like what power supply model, what drivers are you using.. The power supply powers the drivers and the driver...
Ok so that's easy, you need to change input 7 to "probe", not 1. Cheers
Hi Defender, Do you have one wire going to your endmill and another to the plate? A picture might help us, also make sure the input is setup in...
Grimace, did you try adjusting the current pot? really sounds like too low current.
