Separate names with a comma.
Some features disabled for guests. Register Today.
Yes and that gap seems to be 0.5mm which can be done with tape or I used 4x0.5mm carbon fiber strips, and CA glue which bonds to the...
Ah yes, there is that, good point. Cheers
Yes DXF drawing with draftsight is all you need. There used to be plugins for sketchup which made DXF files from any sketch but I gave up on...
Been using this one, 1" - 1/4" shank $12 on amazon
Hi Phillip, Check your sender settings. There is a truncate setting and a max command length setting. You can make the max character setting...
Short and slow drill pecks and you should be good. I was able to drill the holes for M4 threads and my linear rail bolts lined up nice, with an...
Did you follow my link to the super cheap short flute drills? These type are commonly used for drilling rivet holes in aluminum. They have a tip...
Flint, you think PC is expensive wait till you start looking at the fancy high tech engineering plastics, they are crazy. :eek: Cheers
Last time I used it I did a 1mm peck with 400mm/min z speed, had the makita set to about a 3.
I use 1/8" center drill bits for holes that must be 1/8" they are cheap and work well, something like these, I can't find the ones I have, but...
Hi Aaron, You can always adjust the current (with the dip switches) after you try a couple practice runs to see how warm/hot the motors get, they...
Cool demo I wish he would have demonstrated connecting both ends.. I think he didn't because it would not have made a ground loop. Ground loops...
Probably have to swap the end plates around so the bearing recess is on the other side.. But I agree anything over 250mm should be setup in...
Hi Benny, If a motor is going the wrong way just swap one of the two motors coils wires around. it's not the limit switches, your machine doesn't...
Sounds like a good plan, I keep forgetting that you are using Mega and I'm not sure many people are, could very well be a Mega2560 GRBL bug....
Just set the "cut Depth" for the desired spring force. Calibrate using a scale and see how many mm of down movement you need to achieve 15lbs of...
Personally, I would build something like the cnc router parts machine. You need more than a 4080 or c-beam for 48" gantry travel, things get...
Hi Rebel, The lowrider uses nema 17, you would have to "upgrade" every part to get something you will be happy with IMO. Impressive engineering,...
A spring would make the pressure part easy.
Exwhyzee, that is odd that Z would home backwards from where it should when you have $3 as 3...Should be no reason to swap a coil when $3 does the...
