Separate names with a comma.
Some features disabled for guests. Register Today.
Interesting you have your Home $23 direction set to 7 which should make the Z go down instead of up when homing.. all inverted I would think you...
Oh boy! yes, there are many differences from what I can see. [ATTACH]
It's been a while since I used UGS, but yes that looks like it's seeing the switch. You could always try Estlcam, flash the firmware, its easy to...
Hi ExWhyZee, Yes $23 sets the home move direction, you can put it anywhere you want. Make sure the machine is set up correctly, where X is left...
Kelvin, might need to calibrate your input. What’s the make/model of your vfd? Gary
I'm thinking the same thing, already have the track, it's the door slides, so you just need a pulley and motor at one end and an idler pulley...
Thanks, some day I’ll have this all figured out, but getting there, little by little. 3.3mm for the trochoidal and finish passes, so two passes on...
Yes, Estlcam No lube Spiral up cut $5 link provided Climb cutting and 300mm/min, 5% finish cut (5% of dia finish pass) I did one today at...
I tried a standard two flute today and with a finish pass, really happy with the results, this was still torchoidal, then a 300mm/min 2.2mm doc...
Hi Jiarko, if the microstep wasn’t working then the distances would be off. After a long run do the motors get warm? If not turn up the current....
Ok, looks like the free version of mach3 doesn't let you change this. What speed are you limited to? I'm figuring 25kHz x 60 / 666.66 =...
I can't see anything in the video, something with the encoding.. but the audio sounds just like steppers with no microstepping. Does the...
everything looks good there, Make sure your wheels are not too tight on X and Y. To tight of wheels (eccentrics nut adjustment) will make a...
Hi Jiarko, post your $$ grbl settings.. what micro step do you have all the jumpers set to now? The current pot setting can also have an effect on...
Should be able to change.. maybe disconnect the g540 first? Then reconnect. It is changing the parallel port communications, that is a big...
Does it work at all? You need to use GRBL for mega, not sure if you are. GRBL for mega link
Hi Gaou, Not a problem, I see English is not your language, but you are doing great! By "threads" I mean I searched google and found other forums...
Gaou, you can an increase your kernel speed from the default 25kHz, but your computer might have issue with it, or maybe not, just have to try. I...
Hi Gaou, first thing we need to know is what controller and what driver settings, the steps per mm will reflect the lead and your microstep...
No Prob, this is the page you want.. GRBL Wiki/github same chart as the step invert cheers
