Separate names with a comma.
Some features disabled for guests. Register Today.
Hi SugarJ, Yes you set the home seek direction using $23, it works, my machine is left-X, front-Y up-Z home ;) It's just direction invert or...
But you can put home easily anywhere you want, like front / left and then it's positive workspace.. not that it matters one bit.. ;)
If he knows of anybody with a nice table saw or calibrated miter saw this would be the best way, just take the parts there and have them trimmed....
How are you controlling the router with estlcam? with a SSR or contactor? Could be overloading the xpro. You want to separate anything high...
Hi Miles, I don't have an Xpro but I've never seen this, Does it always do this or just with one particular file? If you can, post the file that...
Hi Keith, it's your cut file, something is up with your settings, you have all your rapids inside of the work instead of above.. make sure you...
Hi Keith, Hard to say without more info, post your grbl $$ settings, and post one of your fusion generated cnc files. Cheers Gary
Yep, i agree, they were given to me to try out, so i'll try... In the future, I plan on doing a full rail and ball-screw machine similar to the...
Hi Kevin, Are you talking about drag chain? Lots of ways to mount, most people use some home made bracket, I was able to use some cut offs of 2040...
Sounds good, I was able to get a hold of some hgh15 rails, but not what I would have picked. They have a bit of drag because they are so tight, I...
Hi Keith, GRBL Cheers
Yes slight variation on the Ox HD One of the plates is for linear rail Z axis. Gary
I'm stealing the bolt on Z setup.. I thought that's how the Workbee was but I guess I didn't look at it that close. I used 6 M5's. Thanks MG Gary
Nice thing with the O-flute is they fling the chips out so well, I've been doing hour long cuts with no assistance or babysitting in 1/4" 6061. I...
Good info guys.. Just shows how many variables there are, what works for one might weld chips for another! Some more tips; -I get much better...
For 2mm aluminum you should be able to slot cut with a good tool, the ones I use are $4 ;), for over 6mm I could not get anything to work...
Hi Daniel, Does it have a grbl post processor? Looking around quick it looks like it doesn't, so it's using codes that are not supported. Regards...
Yes the Makita collet can be a real pain to get the bit out, I've found that if it's stuck i can take the nut off and using the wench apply some...
You really shouldn't need coolant for aluminum. Welding chips to the bit just means you are cutting too slow with too many RPMs or too much DOC...
Hi Jayman, you really want more axis or just drive more motors for each axis? 3 motors driving X is still just one axis. You can drive as many...
