Separate names with a comma.
Some features disabled for guests. Register Today.
$23 is the home direction.. if 1 works then fine.Something isn't right still
Wow I like that test you did, is it just the pic or does 62 look the best? Either way when I do my v-carving I get some similar results I think...
FK yes, bug time RC nut, cnc has been taking all my time though... this winter hope to start cutting some kits. You can leave the home anywhere...
I would think the angle is off, maybe tell the software it'a 59.5deg or 60.5 and see which is better, dial it in with angle. Diameter has almost...
Hi FK, You don't need to swap coils to change direction, when you can use $3 to do this.. When you home in the back left that is where you are...
Right, get the Y moving in the correct direction and use $23 to get it moving in the correct direction for your homing position. Using $3 is...
FK, Yes what you did was like a double negative.. canceled out.. you need to reverse the Y using $3 and then reverse your home direction for Y...
Finished the new improved Makita mount Sunday, turned out good. things I could still do better, 1) finish pass should be with the 3 or 2 flute...
Hi Spider, Cut lots of HDPE, it's one of the easiest things to cut.. Polypro on the other hand.. not as hard to get right as acrylic but it will...
Don’t use a drill operation use a helical drill opperation with a 1/8” bit or 4mm endmill.
Elaire.com Has makita collets
Tony, Probably heat related, hows your cooling? Did you make sure all your motor connections are tight? Cheers Gary
Tony Is it working or no? Gary
Hi Gary, If you can configure Mach 3 things will look familiar. So is skp 7 = sketchup 7? is sketchup what you plan on using? SketchUCam? Then all...
Hi Gary, Lots of info here XPro Wiki It boils down to a few choices, Universal Gcode Sender (UGS) , GRBL Panel or Estlcam for actually interfacing...
Right, in Aspire select GRBL post.
Just did a new spindle hoop as one of mine cracked (still usable), was a design flaw.. so new one leaves more meat for the clamp screw. Was trying...
UGS, if it's working for you don't "fix" it! The only place I know of making collets for the Makita RT701 is Elaire, good quality but $$, I use...
Tony, Probably overheat protection.. could try lower the current pot a hair on X. Or get more airflow over the board. I would think the LED's...
2 by 4 is a colloquialism... just like that I had a chance to use colloquialism in a sentence.
