Separate names with a comma.
Some features disabled for guests. Register Today.
H. Page one has the donation link.
A quick way to check firmware is to install a 100% cartridge and see if it errors. If not, print the test print and it should bring it down to...
It is not ceramic... trust me.
Thanks Razor. I confirmed that it worked with 96% alumina.
You might be interested in this thread: [HOW TO] Replace the tubing on your Cube 3 cartridge
I never could find my 0% ABS. :(
Are you after parts or chips? And where are you located?
The whole idea about casting is to get rid of residual stress within the material. Funny enough, the plate flatness means little when just the...
4.03 is what forces the upgrade.
This is what mine looks like over the magnets: [ATTACH]
Very flat and rigid is 7075 aluminum. It cracks when you try to bend it. Problem with aluminum is that it expands significantly as it heats up....
You could try renaming the .ar file to the 1.14B name. Otherwise you have to downgrade your UI software... 3.something instead of 4.03. 4.03...
The closest thing in CTE to alumina is Kovar... and a close second is Ti. I would never join aluminum to alumina directly. Over 6", that would...
I work with alumina in my professional life on a regular basis. That is one surface that I can depend on. Macor, however, does exactly what you...
Same guy has 6" x 6" x .04" for $24. Ordered. LARGE THIN SQUARE 6" x 6" ALUMINA CERAMIC SHEET SUBSTRATE No.: 18 | eBay I'm going to try this...
Yep :)
Razor... glass doesn't like me. My parts tend to have excessive adhesion.
The gauge they supplied with the printer.
That is likely the second binary file by managing machine type and activation. Probably keyed into a hardware device unique ID. If you can...
Sweet... yes and no. Early units have a polymer that has signs of thermal expansion stress shearing the material at the magnets. Later versions...
