Separate names with a comma.
Some features disabled for guests. Register Today.
I jut let the magic smoke out of the chip for my Z axis, not sure what I did. Everything was fine I had run several parts and was making a few...
I took a little over a year break from my build, I had a big remodel project going on that's finally winding down. I have been hitting it pretty...
5 Lbs 11 oz
I'm using a 24v 360w power supply, so far so good. NEMA 23 motors
[ATTACH] I sort of got it working I can get it to move down and stop on the touch plate it won't raise up with the next command I put it on the...
Read this earlier post Snokid was very helpful and posted some videos later I used basically is exact settings and my machine is dead on. CNC...
I'm running grbl control with a windows 7 machine I had issues at first and removed all of my limit switches as David suggested. Not sure thats...
I'm not sure if this is what your looking for but in "resources" there a tutorial section this is what I used to calibrate my machine. HOWTO...
The GT3 belt is about twice as thick as GT2 (see graphic) and according to the videos the reason they recommend using is because it's stronger. I...
Disconnected all of my limit switches I think I was not zeroing my machine in the correct order. I think I was loading the G Code and then...
Snokid thanks did some test runs tonight and I'm very close, just need to tune up on G-code and how grbl panel works. I ran the openbuilds logo...
Wow thanks for the video!I'm out in the shop and going to make the changes as suggested. I'll see if I can turn a board into saw dust.
I have limit switches on Z & X didn't order enough for Y. For hard limits doesn't it use the X,Y & Z limit switches? I measured max travel so I...
Definately going to to speed things up I didn't know gcode would override the max speed travel I was worried it would crash big time if I didn't...
Thanks that's exactly what I was looking for, I came up with same $100 & $101 but I think I was confusing $110, $111, $112 your max is much higher...
I got info from the grbl Wiki so I've got a basic understanding of the settings. $100, $101, $102 are what make m really struggling with trying to...
I have a V2 Xpro just got it up and running a few days ago so other than it works. I'm struggling with base settings for my stepper motors this...
The box I purchased at Menards 12"x 12" x 6" just look in the electrical section near the PVC conduit if you don't have a Menards I would assume...
Ego got in the way, Fixed my bad wiring job, XYZ and A are all working. I hope to have my machine up and running by friday so I can adjust...
its alive! Not sure yet if I wired things wrong I tried using the grbl settings Steve so kindly posted. and I had nothing still. I wired a motor...
