Separate names with a comma.
Some features disabled for guests. Register Today.
He uses Aspire, 2 flute flat nose spiral bit. Didn't say anything about squares. He's going to try some various sized squares in the next day or...
Hey guys: A client called me up with a weird problem. His machine is an OB based design, running GRBL1.1F. When he engraves a circle, it...
You would have to switch to a non-GRBL based system and software like Mach 3. GRBL does not support 4 axis. Perhaps the Novosun controllers or...
By dox I mean dox, surely there was some kind of documentation with the board when you bought it. If not, Google is your friend. MG
If you are using GRBL version >1.0+ the pins are already set up with pin 11 as PWM and pin 12 as Z limit. No tweaking is necessary. How are you...
My personal take on motors is that the stock 185 oz in is more than sufficient for normal use. Larger motors are used for larger machines that...
http://xloader.russemotto.com/ MG
I use a program called Xloader instead of the Arduino IDE. Very quick and easy. Works well with Uno and Nano, not sure about Mega. Needs the...
Yes that's the correct length for a Workbee. The OB ones are a bit longer, to compensate for the thicker end blocks. I use the Sainsmart TB6560...
What's wrong with a simple Arduino and some individual stepper drivers? Way more customizable, way cheaper, and way simpler to fix. MG
What temper tantrum? All I did was refute your statements and state my own opinion on the topic at hand. I simply stated facts. Last time I...
Hmm, sounds pretty normal to me. One thing, use a dry film lubricant on the lead screws and wheels/track. I like WD40 Specialist Dry lube. It...
Not sure why the blocks would make noise. Never seen that. I usually just tighten the block on one end, loosen the other. Then, using two...
What is your Z axis motor microstep setting? If it is less than 1/8, it may just be cogging of the motor. What type of motor drivers are you...
I do have a problem with software that doesn't work, doesn't work as expected, or is buggy as hell. And I can comment on what policy should be,...
That's all very well and good, but don't you think that this is important enough information to let people know Before they try to use the product...
If that's the case why do some of them work and some not??? @Peter Van Der Walt
It does load, but I don't see why. I went back and looked at the original file under a microscope (extreme zoom) on my CAD program, and I could...
I was playing around trying to get OB Cam to load a DXF file of the Ox gantry plates. Some of the radius's on corners and slots seem to be...
I've heard some good things about the Stepcraft, but also some bad things. Their spindle of choice is their MM1000, which might look like a...
