Separate names with a comma.
Some features disabled for guests. Register Today.
Or a good quality measuring tape? Longer = less error percentage HOWTO Calibrate your CNC Machine for MACH3 or GRBL (without the wizard but tips...
Use the longest distance possible (100mm default is just entered by default for folks with small machines like our Minimill)
Can you please do me one last favour (before we swop it and a replacement gets damaged too) Power up VFD and measure the two wired you had on...
[ATTACH] Comparing to a standard machine profile (LEAD1010) the only change I see around there is $30 (Expected, just make sure to use M3 S24000...
Every unit is extensively tested (including USB comms as part of firmware flashing and the test procedure) in the factory. So if its a faulty...
Try a Windows PC to rule out Hardware?
Wizards and tools > Calibration to fine tune your steps per mm - provided its mechanically tight, true and trammed.
Then refer earlier advice: Flip the offending axis (looks like its flipped on Y) So, what about jogging Y? Does Y+ move the Toolhead to the...
[ATTACH] Looks correct to me.
1) Make sure you installed the correct driver: docs:blackbox-x32:install-drivers [OpenBuilds Documentation] 2) Make sure your Mac isn't blocking...
Did you follow the specific steps for the Mac in the driver's Release notes (In the same zip you downloaded where the DMG is)? [ATTACH] Try a...
Calibration menu under Wizards and Tools menu
Any known miswirings, incorrect PSUs, incorrect type of Plasma etc? (If known best to declare - otherwise we chase the other causes - but the...
CAD/CAM would look wrong in the preview. But post files for review
Test by jogging. Jog X+ > did toolhead move right? If not. Correct $3 in Grbl Settings Same for Y etc
Rotation or Mirror? (Title says one, post says another) Mirrored is simpler (Grbl Settings tab > $3 Direction Invert > Flip switch for offending...
That would typically not be covered under warranty. But the 4X might have aged out of warranty already. Havent been for sale in a while
That indicates the BlackBox's 0-10v output became damaged. Any earlier miswirings or perhaps a faulty VFD that backfed the output?
Log outputs would be helpful. But probably EMI or a wiring issue (the resetting sounds almost more like a short somewhere between V+ and GND...
That's a controller dependant question then The probe is just a switch. The question is What does the Macro for your new CONTROLLER need to look...
