Separate names with a comma.
Some features disabled for guests. Register Today.
I agree the MDF is not the best material in this use case, I think you guys are way over thinking it. Given that 4 open-wheels are all that...
LOL, yes I have seen the same thing when doing an STL file recently, also with V-carving of text. Unfortunately there are so many variables to...
Marc, Did you try swapping x and y (step and direction output) at the xpro? this would rule out the Y channel being bad. My guess would be you...
That’s the key that I think some miss.. Thanks Batcrave! Gary
If you are using Arduino already just get drivers. Did you already acquire the control program for Arduino and the joystick?
Isn't there a way to change the current setting with those sheilds? I looked at the stepper control page and there is no mention of changing amps...
Hi Bribeck, those little adafruit steppers are only 350mA motors, the Openbuild ones are 1800mA (they are bigger). You probably need to turn up...
The router is not resting on the lip at the end of the router, the clamping force is very secure. I put heat shrink around the hose clamps to...
Could do it like this, temporary mounts .. really didn't see any improvement with aluminum vs the hose clamp mounts.. the black parts are hdpe but...
that would make too much sense ;)
Hi Kevin, You asked about using the two motors on the X axis, I think you mean the Y? the Y is front to back the X is side to side... Anyway you...
You can always install win10 and never enter a key, it will ask for a key forever but will work fine.. also you can buy a key on eBay for cheap....
Hi Marc, the motor you listed has a nice low inductance.. and would do fine on 24 Volts ( assume you mean Volts not "36w") but when using external...
:), yes Estlcam is my favorite, I think I've become its biggest cheerleader here. You have two options with Estlcam.. 1) Draw your file using the...
Let me look... I'm sure somebody has a minute to talk? I think I see Mark in the far corner over there...? I think this is the live feed of the...
Hi Marc, It's the same just use the screw terminals which make it even easier. Not sure why you bought an XPro when Arduino does the same thing?...
The counter bore for the heads helps with clearance in some builds and the hex on the other side helps retain nuts which makes installation easy...
I just tried your file in Estlcam, with one issue, i had to draw a border around the part to end the pocket functions.. but otherwise was easy to...
Hi GST, could try turning down the current on all the drives just to see if you can get them working. can you measure the output voltage of the...
I'm surprised nobody corrected me on this, I was thinking more about it and the $5=1 will just decide NO (=0)vs NC (=1) operation, you still want...
