Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

1000mm X 1000mm with tinyg

Discussion in 'CNC Mills/Routers' started by gazingm42, Feb 26, 2017.

1000mm X 1000mm with tinyg

1000mm X 1000mm with tinyg

Discussion in 'CNC Mills/Routers' started by gazingm42, Feb 26, 2017.

1000mm X 1000mm overhead cnc machine

Woodworking CNC 1000mm Large
  1. gazingm42

    gazingm42 New
    Builder

    Joined:
    Feb 8, 2017
    Messages:
    56
    Likes Received:
    10
    #1 gazingm42, Feb 26, 2017
  2. jamesdjadams

    jamesdjadams Well-Known
    Builder

    Joined:
    Nov 1, 2016
    Messages:
    40
    Likes Received:
    48
    Hi, I'm using TinyG as well.

    Do you mind sharing your configuration ($$ command)?

    Thanks,
    -Jamie A
     
    #2 jamesdjadams, Mar 11, 2017
  3. gazingm42

    gazingm42 New
    Builder

    Joined:
    Feb 8, 2017
    Messages:
    56
    Likes Received:
    10
    Jamie. I will when i get back from a business trip on Wednesday.

    The major change i had to make was on the motors tr settings. ie $1tr

    It was set at 1.250. I had to delete something me trial and error testing. Using universal g codr sender i would jog it 10mm. Change it and measure again. It finally worked for me i beleive at 6.850

    Now it cuts spot on for me using a raspberry pi 3 with json running in the garage.
     
    #3 gazingm42, Mar 11, 2017
  4. PatrickB

    PatrickB New
    Builder

    Joined:
    Aug 18, 2017
    Messages:
    5
    Likes Received:
    4
    Hi!
    Your build did not need any custom milled plates. Did I get this right? If so, this is a very elegant and easy to build solution! I was looking for something like this. Did you do a 3D model? Would you mind sharing it?
    Thank you! Patrick
     
    #4 PatrickB, Aug 19, 2017
  5. gazingm42

    gazingm42 New
    Builder

    Joined:
    Feb 8, 2017
    Messages:
    56
    Likes Received:
    10
    No custom milled plates. 100% of the parts purchased at openbuilds, which made it very easy to put together. I did not make a 3d model. If you want any pictures please let me know.
     
    #5 gazingm42, Aug 19, 2017
  6. PatrickB

    PatrickB New
    Builder

    Joined:
    Aug 18, 2017
    Messages:
    5
    Likes Received:
    4
    Could you give me some information on the xz plate assembly? I don't see exactly what parts are need and how they are assembled. Thank you!
     
    #6 PatrickB, Aug 19, 2017
  7. JimJ

    JimJ New
    Builder

    Joined:
    Mar 1, 2015
    Messages:
    19
    Likes Received:
    6
    I was thinking about upgrading my platemaker to a 1000x500mm sphinx design but might go with your design and save a few bucks. it looks good.
     
    #7 JimJ, Oct 17, 2017
  8. gazingm42

    gazingm42 New
    Builder

    Joined:
    Feb 8, 2017
    Messages:
    56
    Likes Received:
    10
    Jim, I actually have since raised the X up a little bit. Giving me more Z axis clearance. I choose to go with the 1000 x 1000 simply giving me a largera area.
     
    #8 gazingm42, Oct 30, 2017
  9. JimJ

    JimJ New
    Builder

    Joined:
    Mar 1, 2015
    Messages:
    19
    Likes Received:
    6
    I'd love to go to 1000x1000 just do not have the room in the garage, maybe one day. Looks like tomorrow I'll be ordering a few more parts for the conversion. The platemaker just did not have the stability I was looking for.
     
    #9 JimJ, Oct 30, 2017

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice