Welcome to Our Community

Some features disabled for guests. Register Today.

C-Beam Stock Frustration

Discussion in 'General Talk' started by Kevin Justice, Dec 4, 2015.

  1. Kevin Justice

    Builder

    Joined:
    Oct 31, 2015
    Messages:
    4
    Likes Received:
    0
    OK, I'm venting. I have been planning my build for some time and after I found out about Openbuilds have been telling a lot of people about it. In the end it will probably be around $800 for Openbuilds (it's going to be a large 3d printer. I placed a big order on black Friday for the initial parts. At first I was going to use 1m C Beam but before I could place my order it was out. Reconfigured for 1.5M c beam. Ordered and paid for.

    And now I get an email 1 week later that it was cancelled from my order with no ETA. Still shows up on the site as in stock though. I've requested they honor the price when it's back in stock - we shall see.

    So it takes a week to figure out you are out of stock? I was thinking you'd be shipping Monday or maybe Tuesday, not waiting til Friday just to send me an email. And no, the rest of the order hasn't shipped either. Not sure what you are waiting for.

    I'm very frustrated right now with Openbuilds. If you are going to have a sale, you honor the orders and you start ship them the next business day. My next project was going to be an Openbuilds CNC machine. But obviously my first dealings with Openbuilds has left me questioning my choice.
     
  2. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Where are you from?
     
  3. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    I had the same problem. I placed a large order on black Friday and was notified on Wednesday that the 1500 mm "c" beam was on back-order. The rest of my order was shipped.

    Then later Wednesday evening the c beam was back in stock according to the web site. So i reordered it again. The order is still showing and I haven't received anything one way or another.

    Then the c beam showed on back-order again on Thursday. Just checked again and it shows available again! Im convinced they are messing with my head now.

    dddman...Im in Washington state...what will you charge me to send a couple 1500 mm c beams my way?
     
  4. Kevin Justice

    Builder

    Joined:
    Oct 31, 2015
    Messages:
    4
    Likes Received:
    0
    I'm in Salisbury MD.
     
  5. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    To Washington state, kind of crazy... CAD$85 so around USD$65
     
  6. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    To Maryland, around CAD$65 so around USD$50
     
  7. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    $65 shipped for 2? Or is that each?
     
  8. dddman

    dddman Journeyman
    Builder

    Joined:
    Mar 2, 2014
    Messages:
    468
    Likes Received:
    187
    Just for the shipping :p I estimated an order of 30 pounds (as I assume you'll need more stuff :) as the Canadian dollar is so low :p). You can go on my website to see the prices and estimate an order
     
  9. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    Haha...capitalism at its best! There is hope for Canada yet!

    Well...if openbuilds lets me know soon about my order, I will order them from you. Do you accept Paypal? Could you send me a payment request for 2-1500 mm c beams shipped to Spokane, WA. I dont need anything more than that at this point. Email is [email protected]
    Appreciate it!
     
  10. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    BTW...just check OBs store and the 1500 mm c beam is still available, but the 1000 mm is now showing out of stock.
     
  11. Kyo

    Kyo Veteran
    Staff Member Builder Resident Builder

    Joined:
    Feb 27, 2014
    Messages:
    673
    Likes Received:
    702
    Spokane, WA huh.. Nice! I am a couple hours away in the Columbia basin now, but most of my family is still there so I am up your way almost monthly.
    Do we have a PNW distributor? hmm something I might consider looking into. :)

    In all honesty this was a big sale for openbuilds they are not a large chain like wall mart. Things get back ordered. But rest assured the parts team will take care of you and your order! I have had nothing but good dealings with the openbuilds store and their distributor's..
     
    #11 Kyo, Dec 4, 2015
    Last edited: Dec 4, 2015
    Mark Carew likes this.
  12. Kevin Justice

    Builder

    Joined:
    Oct 31, 2015
    Messages:
    4
    Likes Received:
    0
    I wasn't expecting WalMart. But I was expecting more than what seems to be some guy out of his basement (a whole week with just an email?). They had other stuff run out of stock - if their inventory was correct it would not have been an issue. That's how e-commerce systems work. So maybe something happened and they ran out. Is it right just to cancel that part of my order? It's not like I can easily get this stuff elsewhere. And where are the openbuilds staff? Not reading their internal messaging system or keeping up on their forums. Maybe my expectations are too high but this is not how I would run a retail shop.

    If they were so backed up with orders, they should say so! Put a message up. "Sorry for the delay but we got inundated...".
     
  13. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    No distributor I know of here in the N.W. Look into it. Ill buy from you!
     
  14. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,760
    Likes Received:
    2,443
    Hey guys,
    We do apologize for the delay in response as well as the order mishap that occurred.
    @Kevin Justice and @Slobberknocker you are correct we did have an inventory hiccup that allowed for a few out of stock items to be ordered. It threw us for a loop for a bit, but thankfully the shopping cart company that we use has since corrected this and we are quickly getting back on track.
    As @Kyo (thank you) stated this was a large sale for the OpenBuilds Team and everyone is really excited and working overtime pushing to ensure that all orders are packed and shipped as soon as possible.
    Thank you to @dddman for stepping in to help provide C-Beam so these guys can continue their Builds :thumbsup:
    We really appreciate all the support the community shows OpenBuilds as well as the understanding and patience that we have received. OpenBuilds is growing and we have you to thank. Its going to be exciting new year with many new Builds and opportunities.
    Thank you
     
  15. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,022
    Likes Received:
    1,690
    I am am always curious when I read these "venting" posts on various sites, and I was wondering if, prior to going to the forum to complain, did you contact Openbuilds via email? I ran into the exact same problem, emailed them my concerns, and they were professional and responsive to my needs. It is really none of my business, but I was just curious.
     
    Mark Carew likes this.
  16. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    I think that more than complaining, its more of a probing to see if anyone else has had the same experience or if they are on an island by them selves. No body likes to be alone.

    But some really do just like to complain!

    Im glad Kevin posted since I was having the same issue. Im also glad Mark had the opportunity to address the issue in a public way for everyone to see. Problem solved.
     
    Mark Carew likes this.
  17. Slobberknocker

    Builder

    Joined:
    Jul 5, 2015
    Messages:
    33
    Likes Received:
    16
    Oh...and I was able to find another distributor that was able to help me out. I dont know if I would have discovered that by emailing my concerns exclusively to openbuilds.:)
     
  18. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,022
    Likes Received:
    1,690
    True.

    I also should have used the word "vent" a second time rather than the word "complain."
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice