Welcome to Our Community

Some features disabled for guests. Register Today.

CNC Greenland Paddle Carver build

Discussion in 'CNC Mills/Routers' started by Andre Cooke, Jan 15, 2018.

  1. Andre Cooke

    Builder

    Joined:
    May 17, 2017
    Messages:
    4
    Likes Received:
    5
  2. GeoffH

    GeoffH Journeyman
    Builder

    Joined:
    Mar 11, 2017
    Messages:
    178
    Likes Received:
    107
    Looking forward to seeing the cut Paddles...
     
    Andre Cooke likes this.
  3. Andre Cooke

    Builder

    Joined:
    May 17, 2017
    Messages:
    4
    Likes Received:
    5
    Yes, I am planning on milling a prototype to try out this spring, build should be completed within a month, then I will do my first tests and prototype
     
  4. GeoffH

    GeoffH Journeyman
    Builder

    Joined:
    Mar 11, 2017
    Messages:
    178
    Likes Received:
    107
    Looked at your model quickly and looks to me as though you could cut it all from top and bottom. I'm guessing that you know something that I don't :), anyway good luck with your project.
     
  5. Andre Cooke

    Builder

    Joined:
    May 17, 2017
    Messages:
    4
    Likes Received:
    5
    My cnc is not long enough to do/cut in one flip, Paddle 78 inches long.

    If this works out well, I am pondering extending the X axis to 96 inches, to cut it as you mentionned
     
  6. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,021
    Likes Received:
    1,689
    Cool! I made that paddle, too. I used the band saw, table saw, spokeshave, random orbital sander and router table. I didn't have my CNC back then and hadn't really thought about using it for making them. Great idea!

    I used to check out the cedar decking at Lowe's and Home Depot every time I would go in there and have amassed a collection of perfectly clear cedar 2X4s to make more, I just hadn't had time. It was shameful the 2X4s I found were going to be used in decks, they are beautiful.

    Several years ago, I got addicted to catching big fish from my kayak and veered away from sea kayaks. I am also ashamed to admit hat I pedal vs. paddle when fishing, but it is much easier to fight 3 mph tidal river and bay currents that way. But, I am veering back towards sea kayaks and have plans for another cedar strip kayak I want to build for playing in the surf. One reason i built the CNC was for making kayak and kayaking/kayak fishing accessories.
     
    Andre Cooke likes this.
  7. Andre Cooke

    Builder

    Joined:
    May 17, 2017
    Messages:
    4
    Likes Received:
    5
    Alright, this is moving along quite nicely, I still have a wiggle in my Z-Axis that I need to resolve. I also wish to get a better spindle / router, the dremel, wont do, for a larger carve. But other than that, quite happy so far.

    My active cutting area is 30 inches on the Y axis, allowing for gantry, sides etc, my first test paddle is 84 inches long, so it will be required to be carved in 3 sections of 28 inches, I am researching and attemting to design a jig, to accomplish this. Quite a challenge so far !
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice