Welcome to Our Community

Some features disabled for guests. Register Today.

Fusion 360 Strooom post processor fault

Discussion in 'CNC Mills/Routers' started by Apothus, Dec 21, 2017.

  1. Apothus

    Apothus New
    Builder

    Joined:
    Mar 25, 2017
    Messages:
    14
    Likes Received:
    26
  2. David the swarfer

    David the swarfer OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Aug 6, 2013
    Messages:
    3,478
    Likes Received:
    1,920
    Giarc likes this.
  3. Strooom

    Strooom New
    Builder

    Joined:
    Feb 28, 2015
    Messages:
    28
    Likes Received:
    4
    This issue was reported several times, although I did never encounter it myself.
    Looks like it results from very small arcs which are generated by Fusion when it does things like adaptive clearing, of 3d milling..
    the postProcessor was improved to handle all arcs down to a certain size with enough precision, and all arcs smaller than that will be linearized to a chain of linear segments.

    Give it a try : Strooom/GRBL-Post-Processor
     
  4. Apothus

    Apothus New
    Builder

    Joined:
    Mar 25, 2017
    Messages:
    14
    Likes Received:
    26
    Thanks for looking into it Strooom. I've been using one of the integrated Fusion360 processors since but ill grab the latest version and give it a shot soon.
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice