Welcome to Our Community

Some features disabled for guests. Register Today.

"Open"Builds?

Discussion in 'General Talk' started by Balu, Feb 20, 2017.

  1. Balu

    Balu Well-Known
    Builder

    Joined:
    Apr 14, 2014
    Messages:
    81
    Likes Received:
    30
    Hello guys,

    I just read a comment by @Rob Stehlik in his amazing Parts Library resource that "The drawings are no longer included because of concerns with people copying and selling Open Builds parts."

    I am a little torn by this comment. I can understand that OB has a problem with people copying and selling their parts, but then it started with the promise of a "an Open Source, high quality extruded aluminum profile building block". To me the "open" in "OpenBuilds" has always meant that all the way, even though getting copied is always a possible outcome when you open source something.

    Then there is the question if conceiling the plans will stop people from copying. Yes, a fully detailed plan makes that a lot easier - to the point where you just have to throw it into CAM, but will this stop a Chinese manufacturer from getting a caliper and just measuring things? I mean if they clone complete cars, a small metal plate will probably not be much of a challenge?

    On the other hand it makes it more difficult for us builders since we are missing details...

    What do you guys think?
     
    Mark Carew likes this.
  2. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Dec 20, 2013
    Messages:
    2,896
    Likes Received:
    1,555
    I'm kind of with you on this one. The drawings are really only of value to the users. The parts copiers are going to machine directly from the wonderful 3D image files provided. Why waste time recreating from drawings what is already waiting right there.

    The real key here should be more focus on protecting the OpenBuilds trademark and the reinforcing within the public consciousness the level of quality control that comes with genuine OpenBuilds parts. When it comes to knockoff parts you never know what you'll be getting....

    surfaces.jpg
    Source: openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w) (...a post which is worth a read.)
     
  3. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,443
    You guys @Balu and @Rick 2.0 are spot on OpenBuilds is an Open Source company based on the open principles.
    Our focus in this area remains on the removal of trademarks applied to low quality clones as well as spam and counterfeit support claims.
    Thank you for your understanding and help in this effort.
    We will be putting these drawings back up very soon. :)
     
    Balu, GrayUK and Rick 2.0 like this.
  4. Balu

    Balu Well-Known
    Builder

    Joined:
    Apr 14, 2014
    Messages:
    81
    Likes Received:
    30
    Hey Mark, thanks for your reply. Quick question: Are you saying the cheap (as in "cheap") clones still use the openbuilds brand / logo for their products?
     
  5. Mark Carew

    Mark Carew OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jun 28, 2013
    Messages:
    2,758
    Likes Received:
    2,443
    Correct, which inevitably means we end up supporting them and in the meantime their low quality gives OpenBuilds Genuine Parts a bad name, so not cool. But we are working on ways to correct this moving forward.
    BTW Drawings are back up - Solidworks 2014 Parts Library
    Thanks Rob
     
    GrayUK, Peter Van Der Walt and Balu like this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice