Welcome to Our Community

Some features disabled for guests. Register Today.

Secure CNC Mounting Technique...

Discussion in 'CNC Mills/Routers' started by UltiBots, Jun 21, 2016.

  1. UltiBots

    UltiBots Well-Known
    Builder

    Joined:
    May 8, 2014
    Messages:
    57
    Likes Received:
    76
    Hi all -

    I want to share a great technique for affixing plates to C-Beam, OX and CNC routers. This has worked exceptionally well with 6.5mm aluminum plate.

    [​IMG]

    The following YouTube videos explain the technique well.




    Brad - www.UltiBots.com
    ==================
    Modified C-Beam Bundle
    Dewalt 611
    Elaire 1/8" Collet
    1/8" Single Flute Carbide End Mill
    Workflow = Fusion 360 & Cam > Chilipeppr > Tinyg
    RPM ≈ 25,000 (dial setting 5)
    Feed @ 20"/min (508mm/min), Ramp @ 5"/min (127mm/min), Plunge @ 8"/min (203.2mm/min)
    Pocket cut = 0.25mm rough & 0.2mm finish, 3mm max stepover
    Bore cut = 0.2mm pitch
    Contour cut = 0.25mm rough & 0.2mm finish
     
    #1 UltiBots, Jun 21, 2016
    Last edited: Jun 21, 2016
    Ronald van Arkel and Moag like this.
  2. Giarc

    Giarc OpenBuilds Team
    Staff Member Moderator Builder Resident Builder

    Joined:
    Jan 24, 2015
    Messages:
    3,021
    Likes Received:
    1,690
    Great idea!
     
  3. GrayUK

    GrayUK Openbuilds Team Elder
    Staff Member Moderator Builder

    Joined:
    May 5, 2014
    Messages:
    1,668
    Likes Received:
    627
    Saw this video ages ago, and therefore completely forgot about it. :banghead: (Must remember!) :rolleyes:
     

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice